Abstract:The circumferentially non-uniform clearance has significant effect on the overall performance and operation safety of high loading compressor rotors. However, both the variation rules and mechanism of flow characteristic in the circumferential, radial and streamwise directions caused by the asymmetric clearance are not fully clarified, which restricts the performance degradation assessment and rubust design of high loading compressors. Therefore, different types of asymmetric tip clearance were designed in this paper to reveal the circumferential fluctuation laws and induced mechanism of key characteristic parameters in full-channel domains of compressor rotor with circumferentially non-uniform clearance. It is shown that the circumferentially non-uniform clearance has less effect on the total pressure ratio and efficiency of compressor rotor, while it causes an obvious deterioration of the stall margin. Furthermore, the circumferentially non-uniform clearance causes the circumferential fluctuations of performance parameters, and the fluctuation amplitude has been affected by the eccentricity ratio and operating condition of rotor directly. In addition, the leakage flow originated from a single channel may pass through about three adjacent channels in rotor with uniform clearance, while it covers almost seven adjacent channels in the rotor with circumferentially non-uniform clearance. In consequence, it is precisely the difference of strength variation of leakage flow in tip region caused by the circumferential distributions of tip clearance that produces an alternated variation of low-velocity zone in rotor prototype and a concentrated distribution of low-velocity zone in the range of 270° to 360° of rotor with non-uniform clearance. Due to the serious blockage appearing in this range, the rotating stall of transonic rotor with circumferentially non-uniform clearance has occurred in advance, even with a maximum drop of 35.94% in stall margin.

Numerical Simulation of High Pressure Axial Compressor with Tip Clearance in Rotor

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Vortex structure control based bleed in axial compressor cascade with tip clearance using large eddy simulation

Effect of Tip Clearance on Compressor Performance

Numerical Simulation Of A Transonic Centrifugal Compressor Blades Tip Clearance Flow Of Vehicle Turbocharger

Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

An 11-Stage Axial Compressor Performance Simulation Considering the Change of Tip Clearance in Different Operating Conditions

A numerical study on the tip clearance in an axial transonic compressor rotor

Effect of Nonuniform Tip Clearance on the Performance of Transonic Axial Compressors

Influence of the Tip and Axial Clearances on the Aerodynamic Performance of a Helium Compressor

Pressure and Velocity Fluctuations Characteristics of the Tip Clearance Flow in an Axial Compressor Stage at the Near-Stall Condition

Effects of Circumferentially Non-Uniform Clearance on the Spanwise Flow Characteristics in a Transonic Compressor Rotor

Influence of Tip Clearance on Performance of A Contra-Rotating Fan

Effects of tip clearance on flow field and performance of a centrifugal compressor

Numerical Investigation on Flow Field Distribution of Eccentric Compressors Based on Steady and Unsteady CFD Methods

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Influence of Blade Tip Surface Roughness on the Performance of a Single-Stage Axial Flow Compressor

Effect of Tip Clearance on Helico-Axial Flow Pump Performance at Off-Design Case