Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

ESTIMATION OF EXTREME VEHICLE LOAD EFFECT BASED ON GPD MODEL

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Site-Specific Fatigue Load Spectrum for Urban Bridges

A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors

Analysis of dynamic load of vehicle bumping at bridge-head using distributed spring-damper element

WIM-based vehicle load models for urban highway bridge

Multi-parameter Dynamic Traffic Flow Simulation and Vehicle Load Effect Analysis based on Probability and Random Theory

Probabilistic model of traffic scenarios for extreme load effects in long-span bridges

Measurement-Based Vehicle Load Model for Urban Expressway Bridges

Prediction of Maximum Live-Load Effects for Bridges Based on Weigh-in-Motion Data

Statistical Analysis and Probabilistic Modeling of WIM Monitoring Data of an Instrumented Arch Bridge

Investigation of multiple-presence factor for traffic loads on road-rail bridges based on a novel extreme value analysis approach

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

An Improved Time-dependent Reliability Model for Aging RC Bridges Based on GPD Load Distribution

Bayesian Updates for an Extreme Value Distribution Model of Bridge Traffic Load Effect Based on SHM Data

Evaluating Probabilistic Traffic Load Effects on Large Bridges Using Long-Term Traffic Monitoring Data

Vehicle Load Effect of Long-Span Bridges

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Threshold selection for extreme value estimation of vehicle load effect on bridges

Vehicle models for fatigue loading on steel box-girder bridges based on weigh-in-motion data