A new electrochemical method for simultaneous removal of Mn2+and NH4+-N in wastewater with Cu plate as cathode
Jiancheng Shu,Yuhao Wu,Yun Ji,Mengjun Chen,Haiping Wu,Yushi Gao,Liang Wei,Li Zhao,Tingting Huo,Renlong Liu
DOI: https://doi.org/10.1016/j.ecoenv.2020.111341
IF: 7.129
2020-12-01
Ecotoxicology and Environmental Safety
Abstract:In this study, a new electrochemical method was used to simultaneously efficient removal of Mn<sup>2+</sup> and NH<sub>4</sub><sup>+</sup>-N in wastewater with Cu plate as cathode. The effects of various reaction parameters on the concentrations of Mn<sup>2+</sup>, NH<sub>4</sub><sup>+</sup>-N and by-products (NO<sub>3</sub><sup>-</sup>-N and NO<sub>2</sub><sup>-</sup>-N, free chlorine and residual chlorine), as well as the removal mechanism were investigated. The results showed that the removal efficiencies of Mn<sup>2+</sup> and NH<sub>4</sub><sup>+</sup>-N were 99.1% and 92.9%, and the concentrations of NO<sub>3</sub><sup>-</sup>-N, NO<sub>2</sub><sup>-</sup>-N, free chlorine and residue chlorine were 0.73 mg/L, 0.15 mg/L, 0.13 mg/L and 0.63 mg/L reacting for 3 h at room temperature, respectively, when the current density was 10 mA/cm<sup>2</sup>, the mass ratio of ClO<sup>-</sup> and Cl<sup>-</sup> was 1:1, the initial pH was 9. The concentrations of Mn<sup>2+</sup>, NH<sub>4</sub><sup>+</sup>-N and by-products in wastewater met the integrated wastewater discharge standard (GB8978-1996). In addition, spherical manganese oxide was deposited on the anode plate, and spherical manganese oxide collapsed over electrolysis time. Manganese was mainly removed in the form of MnO, Mn(OH)<sub>2</sub> and MnO<sub>2</sub>. NH<sub>4</sub><sup>+</sup>-N was mainly oxidized to N<sub>2</sub>. Economic evalution revealed that the treatment cost was 2.93 $/m<sup>3</sup>.
environmental sciences,toxicology