Abstract:A novel hyperbranced azo polymer with terminal diazonium groups was synthesized by step-growth polymerization of 4,4'-diamino diphenyl sulphone's diazonium salts (A(2)) and benzene-1,3,5-triearboxylic acid tri2-(N-ethylanilino) ethyl ester (B-3) through azo-coupling reaction. 4, 4'-diamino diphenyl sulphone (0.248 g, I mmol) was dissolved in a hot homogeneous mixture of glacial acetic acid (7.5 mL) and sulfuric acid ( I mL). Aqueous solution of sodium nitrite (0.166 g, 2.4 mmol) in 0.5 mL water was added dropwise into the solution at 0 degrees C and kept at this temperature for 5 min. The diazonium salt solution of 4,4'-diamino diphenyl sulphone was then added dropwise into the solution of benzene-1, 3, 5-tricarboxylic acid tri-2-( N-ethylanilino) ethyl ester (0.326 g, 0.5 mmol) in 50 mL DMF at 0 degrees C. After the reaction was carried out at 0 degrees C for 8 h, the solution containing the diazonium-hyperbranched azo polymer was directly used as the polyeation solution. The purchased sodium polystrene sulfonate (PSSA) was used as polyanion. Then the multilayer films were prepared by an electrostatic layer-by-layer deposition method. The self-assembly processes and morphologies of surfaces were characterized by UV-Vis spectra, ellipsometer and AFM. A linear increase of absorbance and thickness was observed as the number of the bilayers increased. Dichroism was optically induced in the self-assembly film under the irradiation of a polarized Ar+ laser beam at 488 nm. After 15 min irradiation of the laser beam at an intensity of 80 mW/cm(2) the orientation order parameter of the multilayer film obtained was about 0.02. With interfering illumination of Ar+ laser beams for 30 min, significant surface relief gratings formed on the self-assembly multilayer film were observed. The spatial period and height of the obtained SRGs were about 744 nm and 20 nm. respectively.

Synthesis of Silicon-Based Polymerized Films by Excimer Laser Ablation Deposition of Hexaphenyldisilane

Effect of polymer addition and temperature on the structure of silicon-based polymer films deposited by excimer laser ablation of hexaphenyldisilane

Effect of Target Modification on Deposition Rates of Hexaphenyldisilane by Laser Ablation

Thickness-dependent Molecular Chain and Lamellar Crystal Orientation in Ultrathin Poly(di-N-hexylsilane) Films.

Study on the ultraviolet nanosecond laser ablation and heat-affected zone of polydimethylsiloxane films based on comprehensive surface analysis

Single Shot Excimer Laser Crystallization of Silicon Films Deposited by LPCVD

Azobenzene-Containing Supramolecular Polymer Films for Laser-Induced Surface Relief Gratings

Deposition of Organosilicone Thin Film from Hexamethyldisiloxane (hmdso) with 50khz/33mhz Dual-Frequency Atmosphericpressure Plasma Jet

Chemical Modification of Silicon (100) Surface Via UV-Induced Graft Polymerization

Fabrication of chemically bonded polyacrylate/silica hybrid films with high silicon contents by the sol–gel method

FABRICATION OF PHOTORESPONSIVE ELECTROSTATIC MULTILAYERS CONTAINING DIAZONIUM-HYPERBRANCHED AZO POLYMER

The Synthesis and Characteristic Study of 6Fda-6Fhp-nlo Polyimide/Sio2 Nanohybrid Materials

Sythesis and curing properties of transparent phenyl vinyl silicone resin with high refractive index

Deposition of Nanostructured Fluoropolymer Films on Silicon Substrates Via Plasma Polymerization of Allylpentafluorobenzene

Synthesis and properties of silicon-containing poly(diethynylbenzen-co-phenoxyphenoxybenzenediacetylene)s

Plasma-polymerized Hexamethyldisiloxane Films Characterized by Variable-Energy Positron Lifetime Spectroscopy

Monolayer behaviors and LB films of dihydroxo (phthalocyaninato) silicon and its polymer — one-dimensional phthalocyaninato-polysiloxanes

Synthesis and properties of silicon‐containing arylacetylene resins with polyhedral oligomeric silsesquioxane

Crystallization of Hydrogenated Amorphous Silicon Thin Films Using Combined Continuous Wave Laser and Thermal Annealing

Preparation and Characterization of Polysiloxane–polyacrylates Composite Lattices by Two Seeded Emulsion Polymerization and Their Film Properties

Fabrication of Reactive Poly(Phenyl-Substituted Siloxanes/Silsesquioxanes) with Si‒H and Alkoxy Functional Groups via the Piers–Rubinsztajn Reaction