Abstract:The new generation of large-thrust rockets commonly employ cryogenic liquids such as liquid hydrogen (LH2), liquid oxygen (LOX), and methane as propellants. Conventional analytical methods established under subcritical (specifically, low-pressure) conditions are inadequate for addressing the atomization issues under trans -critical and supercritical conditions. Therefore, conducting experimental research on atomization of cryogenic fluids under supercritical conditions holds significant practical value. This paper employs liquid nitrogen (LN2) as the working fluid and focuses on conducting injection atomization experiments on LN2 under supercritical pressure conditions. The research involves the design and construction of an experimental system for supercritical cryogenic fluid injection, with the aim of measuring and studying the spray characteristics of centrifugal nozzles under various conditions. Three major categories of experiments were designed for low-temperature LN2 injection: subcritical nitrogen into subcritical environment (BB), subcritical nitrogen into supercritical environment (BP), and supercritical nitrogen into supercritical environment (PP). The experimental results ultimately reveal that for jets in BB, both the spray cone angle and the breakup length increase with higher injection pressure drop. In the case of BP, the spray cone angle decreases while the penetration distance increases with higher pressure drop. As for the jets in PP, the spray cone angle increases and the penetration distance decreases with higher injection pressure drop. Across different geometric parameters of the centrifugal nozzle, it was observed that with an increase in the geometric parameter, the rate of decrease in the spray cone angle with respect to pressure drop amplifies, and the penetration distance exhibits an increasing trend as the geometric parameter grows.

Geysering Inhibiting Research for Single Feeding-Line in Cryogenic Propellant Transfer System

Research of Single-Feeding Recirculation in Cryogenic Propellant Transfer System

Experimental investigation of dual-feed recirculation in cryogenic propellant transfer system

Influence Of Pressurization On Cooling-Down Process With A Gas-Phase Inlet Natural Circulation For A Cryogenic Pump System

Experimental study of self-pressurizing transfer system for cryogenic liquid

Investigation on the Elimination of Geyser in a Cryogenic Pipe by a Recirculation Method

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

Geysering Research in Cryogenic Transfer System

Numerical research of driving mechanism for geyser developing in cryogenic propellant feedline.

Experimental Investigation on the Thermo-Hydraulic Characteristics and Occurrence Boundary of Geyser in a Cryogenic Pipe

Numerical study on geysering instability in circulating precooling system for cryogenic propellant rocket turbopump

Investigation on cryogenic geyser characteristics in rocket cryogenic pipelines with a horizontal section

Experimental Investigation on Cryogenic Line Chill-Down Process by Using Liquid Nitrogen

Investigation on the difference of geyser behaviors among different cryogenic fuels of launch vehicle

A Novel Pipe Structure for Geyser Elimination in a Vertical Cryogenic Pipe

Numerical Studies of Supercritical Turbulent Convective Heat Transfer of Cryogenic-Propellant Methane

Experimental study of Cryogenic jet injection using centrifugal nozzles at supercritical pressure

Investigation of Appearance and Intensity of Geyser Phenomenon in a Vertical Cryogenic Pipe

Experimental investigation on two-phase flow instabilities in long-distance transportation of liquid oxygen

The effect of gravity on cryogenic transfer line chilldown performance using pulse flow and low thermally conductive coatings

Numerical Investigation on the Mechanism of Geyser in Cryogenic Fluid Pipes