Abstract:beta-tricalcium phosphate (beta-TCP) has biodegradability and biocompatibility, but its inherent brittleness limits its application in load-bearing implants. In order to further improve the mechanical property and biocompatibility of beta-TCP, beta-TCP/NC (TNC) composite scaffold with nano clay (NC) as additive and the porous structure of the scaffold has a pore size of 200-300 mu m was prepared by digital light processing (DLP) technique. When the content of NC is 10% (in mass), the sintering shrinkage of each structural feature of the support (TNC10) is the smallest. Addition of NC does not change the phase composition of TCP, and Si and Mg elements are evenly distributed on the surface of the scaffold. Addition of NC can improve the compression strength of TCP scaffolds. NC (particle size < 500 nm) is fused in the gap of TCP particles. Compared with pure TCP scaffolds, the compression strength of TNC10 is increased by 10%. In addition, the specific surface area of TNC10 group was more than 2 times higher than that of pure TCP. TNC degradation rate is faster while Ca2+, Mg2+, Si4+, and Li2+ can be continuously released, which maintains a weakly alkaline environment. The results demonstrate that the addition of NC has a certain promotion effect on the mechanical strength, degradation performance beta-TCP scaffolds. Porous bioceramic scaffolds with good physical, chemical property by DLP method have great application prospects in the field of bone repair.

Preparation And Characterisation Of Nano-Sized Beta-Tricalcium Phosphate With A Ps Template Method

Preparation of Nanosized Β-Tricalcium Phosphate Particles with Zn Substitution

Spherical porous framework of calcium carbonate prepared in the presence of precursor PS–PAA as template

Solvothermal Synthesis Of Beta-Tricalcium Phosphate Porous Nanospheres By Using Organic Phosphorus Source And Their Biomedical Potentials

Structural characterization of room-temperature synthesized nano-sized β-tricalcium phosphate

Preparation of Submicron Biphasic Α-Tcp/ha Powders

Preparation And Characterization Of Porous B-Tcp/Plla Composites With High Beta-Tcp Content

Preparation of highly purified β-tricalcium phosphate ceramics with a microdispersion process

Preparation and Characterization of Novel Biphasic Calcium Phosphate Powders (Alpha-Tcp/ha) Derived from Carbonated Amorphous Calcium Phosphates

Properties of Β-Ca3(po4)2 Bioceramics Prepared Using Nano-Size Powders

Preparation and Characterization of Β-Tricalcium Phosphate/Nano Clay Composite Scaffolds Via Digital Light Processing Printing

Preparation of Porous β-TCP Ceramics

Preparation and Characterization of Porous β-TCP/PLLA Composites with High β-TCP Content

Effect of different ball milling processes on purity and particle size ofβ-tricalcium phosphate powders by solid-state synthesis

A Low Temperature Co-Precipitation Preparation of Nano-Sized Zinc Containing Β-Tricalcium Phosphate Powders

Microemulsion Synthesis of Mesoporous β-tricalcium Phosphate Powder with a Novel System

Novel β-TCP/HA biphasic calcium phosphate microspheres with porous surface structure prepared via a calcium carbonate template

The Effect of Powder Properties on Sintering, Microstructure, Mechanical Strength and Degradability of Β-Tricalcium Phosphate/calcium Silicate Composite Bioceramics

Dissolution Behavior of Submicron Biphasic Tricalcium Phosphate Powders

Preparation of nano-sized strontium containing tricalcium phosphate particles

Low Temperature Preparation of Α-Tricalcium Phosphate Up-Converted Luminescence Nano Phosphor