Abstract:Researchers resort to a wide range of simplified representations at the continuum scale, to model creep-fatigue damage in viscoplastic heterogeneous materials, such as Sn-Pb eutectic solders, caused by thermomechanical and mechanical cyclic loading (e.g., due to power cycling, environmental temperature cycling, vibration, etc.). Typically, in macroscale phenomenological damage models, the cyclic damage is assumed to depend on some loading parameter, such as cyclic strain range, work dissipation per cycle, partitioned strain range, partitioned work dissipation per cycle, cyclic entropy changes, cyclic stress range, integrated matrix creep, etc. In many instances, some of these variables are weighted with a factor to account for rate-dependent effects. The task of finding the best damage metric is difficult because of complex microstructural interactions between cyclic creep and cyclic plasticity due to the high homologous temperature under operating conditions. In this study, we use insights obtained from microstructural and more mechanistic modeling to identify the most appropriate macroscale damage metrics. The microstructural models are based on such phenomena as grain boundary sliding, blocking of grain boundary sliding by second-phase particles, volumetric and grain boundary surface diffusion, void nucleation, void growth, and plastic collapse of cavitating grain boundaries. As has been demonstrated in the literature, micro-structural models suggest that fatigue damage caused by cyclic plasticity should correlate well with either of the two most commonly used damage indicators: cyclic strain range and plastic work dissipation per cycle. This study, however, demonstrates that in the case of damage dominated by cyclic creep, microstructural models developed by the authors indicate closer correlation of fatigue damage with creep work dissipation per cycle, than with cyclic creep strain range.

Viscoplastic Mechanics Constitutive Model Incorporating Void Damage for Pb/Sn Solder Alloys

VISCOPLASTIC-DAMAGE CONSTITUTIVE MODEL COUPLED WITH VOID EFFECTS FOR Pb/Sn SOLDER ALLOYS

Mechanical Properties and Parameter Determination of Anand Viscoplastic Constitutive Model for Pb-free Solder Alloys

Characterization of Dynamic Behavior of Pb-free Material 95.7sn3.8ag0.5cu and Its Determination of Dynamic Constitutive Model Parameters

Experimental Determination and Modification of Anand Model Constants for Pb-Free Material 95.5Sn4.0ag0.5cu

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

A New Visco–elasto-Plastic Model Via Time–space Fractional Derivative

Constitutive behavior and Anand model of novel lead-free solder Sn-Zn-Bi-In-P

Mesomechanical modelling of SnAgCu solder joints in flip chip

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

Deformation and Damage Characteristics of Porous Materials under Different Triaxialities

A Constitutive Model for Dynamic Plasticity of FCC Metals

A developed crystal plasticity model for viscoplastic mechanical behavior of SAC305 solder under thermomechanical coupled cyclic loading

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

A Mechanistic Model for Solder Joint Failure Prediction Under Thermal Cycling

Compressive Experimental Analysis and Constitutive Model of Sintered Nano-Silver

A physically-based constitutive model for BCC metals and its application in tantalum

Modelling of Ag3Sn coarsening and its effect on creep of Sn–Ag eutectics

The Connection between Microstructural Damage Modeling and Continuum Damage Modeling for Eutectic Sn-Pb Solder Alloys

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

The Geometrical Effects in A Model Coupled with Microstructural Evolution and Mechanical Behavior for Small-Scale Solder Joints