Abstract:ABSTRACTCompared with poly(butylene terephthalate)/glycidyl methacrylate grafted poly(ethylene–octene) (PBT/POE‐g‐GMA) binary blends, supertough PBT‐based ternary blends with little rigidity loss were successfully obtained by adding rigid polypropylene (PP) into PBT/POE‐g‐GMA blends to construct core–shell particles during melt blending. The effects of PP content and type on the phase morphology and mechanical properties of the blends were systematically investigated. Theoretical predictions and scanning electron microscopy observation showed that a core–shell structure was formed in PBT matrix with PP as the core and POE‐g‐GMA as the shell. The mechanical property tests showed that POE‐g‐GMA and PP had significant synergistic toughening effect. When PP with high melt flow index (H‐PP) was used, PBT/POE‐g‐GMA/H‐PP (70/15/15) blends possessed the highest Izod notched impact strength, which was 1.9‐fold compared with PBT/POE‐g‐GMA (70/30) binary blends, while the tensile performance loss was little. The essential work of fracture tests was performed to evaluate the fracture resistance of different samples. The results demonstrated that PBT/POE‐g‐GMA/PP ternary blends possessed much better resistance to crack propagation than PBT/POE‐g‐GMA binary blends. The decrease of interparticle distance and the fibrillation of core–shell particles activated intense matrix shear yielding, which was the reason for the high crack resistance of ternary blends. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48872.

Phase Morphology and Miscibility of Ipp/Pcbr Blends

Visualization of Poly(ether Imide) and Polycarbonate Blending in an Internal Mixer

The Morphology and Mechanical Properties of Sps/ipp Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Influence Of Thermal History On Crystalline Morphologies Of Isotactic Polypropylene In Its Miscible Blends With Polybutene-1

Miscibility of isotactic polypropylene with random and block ethylene-octene copolymers studied by atomic force microscopy-infrared

Morphology, Microstructure and Compatibility of Impact Polypropylene Copolymer

Morphology and Crystallization Behavior of Compatibilized Isotactic Polypropylene/Poly(butylene Terephthalate) Blends under Shear Flow

Phase Behavior, Thermal Stability and Rheological Properties of PPEK/PC Blends

Analysis of phase morphology and dynamics of immiscible PP/PA1010 blends and its partial-miscible blends during melt mixing from SEM patterns

Phase Morphology of Immiscible Polymer Blends of Polystyrene with Poly(cis-butadiene) Rubber by Rayleigh Scattering

Phase-Separation In Polymer Blends Comprising Copolymers .5. Polyisoprene/Poly(Isoprene-G-Styrene) Copolymer System

Crystallization behavior of polypropylene/polycarbonate blends

On the phase inversion of polypropylene/polystyrene blends

THE COMPATIBILITY OF SYNDIOTACTIC POLYSTYRENE/ISOTACTIC POLYPROPYLENE/SYNDIOTACTIC POLYSTYRENE-b-POLY(1-BUTENE) BLENDS

Phase Separation in Blends of Homopolymer and Graft Copolymer Based on Styrene and Butadiene

STUDY ON IPP/IR BLENDS

Crystallization and phase behavior of crystalline syndiotactic 1,2-polybutadiene/isotactic polypropylene blends in solution-cast thin films

Phase Modification of Acrylate Rubber/Chlorinated Polypropylene Blends by a Hindered Phenol Compound

Phase Behavior and its Viscoelastic Responses of Poly(methyl methacrylate) and Poly(styrene-co-maleic anhydride) Blend Systems

Blends of Poly(β-hydroxybutyrate) with Poly(propylene carbonate)