Abstract:We report, for the first time, a low cost, compact, and novel mechanically designed extrinsic Fabry-Perot interferometer (EFPI)-based optical fiber sensor with a strain amplification mechanism for strain measurement. The fundamental design principle includes a buckled beam with a coated gold layer, mounted on two grips. A Fabry-Perot cavity is produced between the buckled beam and the endface of a single mode fiber (SMF). A ceramic ferrule is applied for supporting and orienting the SMF. The principal sensor elements are packaged and protected by two designed metal shells. The midpoint of the buckled beam will experience a deflection vertically when the beam is subjected to a horizontally/axially compressive displacement. It has been found that the vertical deflection of the beam at midpoint can be 6-17 times larger than the horizontal/axial displacement, which forms the basis of a strain amplification mechanism. The user-configurable buckling beam geometry-based strain amplification mechanism enables the strain sensor to achieve a wide range of strain measurement sensitivities. The designed EFPI was used to monitor shrinkage of a square brick of mortar. The strain was measured during the drying/curing stage. We envision that it could be a good strain sensor to be embedded in civil materials/structures under a harsh environment for a prolonged period of time.

Absolute Strain Measurement Using an In-Fibre-Bragg-Grating-Based Fabry-Perot Sensor

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

Compact Fiber Strain Sensor Fabricated by a CO2 Laser.

A Novel Strain Sensor Based on a Pair of Fiber Bragg Grating Comb Filters

High Precision Measurement Of The Wavelength Shift Of In-Fiber Bragg Grating With Strain-Gauge

A High-Resolution Demodulation Algorithm for FBG-FP Static-Strain Sensors Based on the Hilbert Transform and Cross Third-Order Cumulant

Ultrahigh-Resolution Fiber-Optic Sensing Using a High-Finesse, Meter-Long Fiber Fabry-Perot Resonator

A compact fiber-based sensor for wide range strain measurement

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Fiber-optic extrinsic Fabry-Perot interferometer strain sensor with <50 pm displacement resolution using three-wavelength digital phase demodulation.

An embeddable optical strain gauge based on a buckled beam

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Mathematical Modeling of π-Phase-Shifted Fiber Bragg Grating and its Application for Strain Measurement in Epoxy Resin Cantilever Beam

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement