Abstract:High-performance vertical vibration isolators are required in precision instruments and physical experiments to reduce the seismic noise, which limits the instrument performance and measurement results. For example, inertial references are needed in interferometric gravitational wave detectors and absolute gravimeters, in order to separate the useful signal from noise. Microseisms typically occur at around 0.07 Hz. The secondary microseisms occur at about 0.14 Hz. Buildings usually wobble at frequencies between 0.1 and 1 Hz. To reduce all these vibrations would require a spring-mass system with a resonance frequency lower than 0.05 Hz. The most commonly applied techniques use a passive vertical isolation system, which is easy to set up and cheap to build. However, to achieve low cut-off frequency, such as 0.05 Hz, there requires longer than 100 m static deflection for a simple passive isolator, which is impractical in most applications. An ultra-low-frequency active vertical vibration isolator, based on a two-stage beam structure, is proposed and demonstrated in this paper. Two beams are connected to a frame with flexural pivots. The upper beam is suspended from the frame with a normal hex spring. The lower beam is suspended from the upper one by a zero-length spring. The flexural pivots of the upper beam are not vertically placed above the pivots of the lower beam. With this special design, the attachment points of the zero-length spring to the beams can be moved to change the effective stiffness. A laser reflectometry is used to detect the angle between the two beams. A laser collimator, a mirror, a beam splitter and an optical detector are fixed to the upper beam, and another mirror is fixed to the lower beam. A laser beam from the collimator is directed to the detector via the mirrors and the beam splitter. The output of the detector is proportional to the angle between the two beams. The minimum detectable angle is 36 nrad. The angle signal is sent to a circuit to generate a control signal, which drives a voice coil mounted between the lower beam and the frame to maintain the angle between the two beams to a fixed value. The isolation system can achieve a natural period of 100 s by carefully adjusting the attachment points of the zero-length spring and the feedback parameters. This type of isolator has a simpler and more robust structure than the famous active vibration isolator-the super spring. The system is promising in applications such as precision instruments and experiments, especially in absolute gravimeters.

Control Of Pre-Isolators For Gravitational Wave Detection

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

H<sub>∞</sub>/μ Robust Control of Vibration for an Ultra-Precision Grinding Machine

Low-frequency Active Vibration Isolation for Advanced LIGO

Aigo High Performance Compact Vibration Isolation System

Seismic Isolation And Suspension Systems For Advanced Ligo

Multi-DOF Isolation and Alignment with Quiet Hydraulic Actuators

Seismic isolation of Advanced LIGO: Review of strategy, instrumentation and performance

H-infinity Optimization for Active Seismic Isolation Systems in Gravitational-Wave Detectors

Control System Design for the LIGO Pre-stabilized Laser

Multi-degree-of-freedom Ultra-Low Frequency Vibration Isolation System for Precision Devices with Decoupled Control

Hydraulic External Pre-Isolator System for LIGO

PID composite vibration control and simulation analysis of an active and passive integrated vibration isolator

Experiments on Active Precision Isolation with A Smart Conical Adapter

Control strategy to limit duty cycle impact of earthquakes on the LIGO gravitational-wave detectors

Strategies for the control of parametric instability in advanced gravitational wave detectors

Advanced LIGO two-stage twelve-axis vibration isolation and positioning platform. Part 1: Design and production overview

Ultra-Low-Frequency Vertical Vibration Isolator Based on A Two-Stage Beam Structure

Seismic Isolation Enhancements for Initial and Advanced Ligo

Design Of An Active Low Frequency Vibration Isolation System For Atom Interferometry By Using Sliding Mode Control