Electrophoretic Assembly of Nanozeolites: Zeolite Coated Fibers and Hollow Zeolite Fibers

C Ke,WL Yang,Z Ni,YJ Wang,Y Tang,Y Gu,Z Gao

DOI: https://doi.org/10.1039/b010197o

IF: 4.9

2001-01-01

Chemical Communications

Abstract:Zeolite coated fibers with compact and full deposits have been fabricated by electrophoretic deposition of nanozeolites onto carbon fibers, whereafter hollow zeolite fibers have been obtained by calcination to remove the substrates.

What problem does this paper attempt to address?

Fabrication of hollow zeotite fibers by electrophoretic assembly of nanosilicalite-1

C Ke,WL Yang,Z Ni,Y Tang,Z Gao

DOI: https://doi.org/10.3321/j.issn:0567-7351.2001.11.022

2001-01-01

Acta Chimica Sinica

Abstract:Hollow zeolite fibers (abbreviated as HZF) have been successfully fabricated using electrophoretic deposition (EPD) technique with carbon fibers as templates and nanosilicalite - 1 as building blocks, followed by removal of the templates by calcinating the zeolite - coated carbon fibers. Dense and complete zeolite deposition on carbon fibers is an essential premise for the preparation of intact HZFs. The formation of zeolite coating depends largely on the applied voltages and the surface charge of nanozeolites, which can be adjusted by the pH of the colloidal solution. In addition, deposition time and colloidal solution concentration also influence the deposit process. The structure of calcined HZFs has been characterized by XRD and IR.
Layer-by-layer assembly of nanozeolite - Zeolite coated fibers and hollow zeolite fibers

Yajun Wang,Jianhua Hu,Yi Tang,Wuli Yang,Chen Ke,Xingdong Wang

DOI: https://doi.org/10.3321/j.issn:0567-7351.2001.07.016

2001-01-01

Acta Chimica Sinica

Abstract:Zeolite coated fibers (abbreviated as ZCF) were successfully fabricated using carbon fibers as templates and nanozeolite as building block, through layer-by-layer assembly technique. After removal of the templates by calcination, intact hollow fibers of zeolite (abbreviated as HFZ) were also obtained. The optimum performance conditions for obtaining these types of materials were systematically studied. The pH value of the zeolite colloidal solution was a key factor affecting the fabrication of these zeolite coated fibers and hollow zeolite fibers. Other conditions, such as ionic strength of the dipping solution, drying the samples after every layer of zeolite nanocrystals deposited and adsorbing a PDDA layer on the silicalite -1 coated carbon fibers before drying also had influence on fabricating intact fibers. The wall thickness and composition of these novel materials could be readily tailored by varying the number of nanozeolite/PDDA [ poly ( diallyldimethyl ammonium chloride) ] deposition cycles and zeolite types used, respectively. The hollow zeolite fibers with hybrid walls were also fabricated through stepwise deposition of different kinds of nanozeolites.
Fabrication of Hollow Zeolite Fibers Through Layer-by-Layer Adsorption Method

Yj Wang,Y Tang,Xd Wang,Wl Yang,Z Gao

DOI: https://doi.org/10.1246/cl.2000.1344

2000-01-01

Chemistry Letters

Abstract:Hollow fibers with nanozeolite walls are firstly fabricated through layer-by-layer (LbL) technique, using carbon fibers as templates, coupled with removal of the templates by calcination. The thickness and the composition of the walls can be readily controlled by varying the number of the deposition cycles and the zeolite types used, respectively.
Fabrication of Zeolite Naa Membranes on Hollow Fibers Using Nano-Sized Seeds Exfoliated from Mesoporous Zeolite Crystals

Hui Yan,Nanke Ma,Zhiying Zhan,Zhengbao Wang

DOI: https://doi.org/10.1016/j.micromeso.2015.06.001

IF: 5.876

2015-01-01

Microporous and Mesoporous Materials

Abstract:Micro-sized crystals of mesoporous zeolite NaA (meso-NaA) are prepared and their mechanical strength is compared with conventional NaA crystals. Crystals are characterized by nitrogen adsorption, X-ray diffraction, scanning electronic microscopy and dynamic light scattering. It is found that micro-sized meso-NaA crystals composed by numerous domains of interconnected nanocrystals can be easily smashed by hand-grinding, showing lower mechanical strength than conventional crystals. The suspension of zeolite NaA nanocrystals (similar to 110 nm) can be easily obtained after removing micro-sized crystals by centrifuging the suspension of the grinded crystals at 1000 rpm and can be used to seed hollow fiber supports. Zeolite membranes with high separation performance are obtained on the seeded hollow fiber supports by seeded growth. This method may open a new way to prepare zeolite nanocrystals for many applications. (C) 2015 Elsevier Inc. All rights reserved.
Zeolitic imidazolate framework derived ZnCo<sub>2</sub>O<sub>4</sub> hollow tubular nanofibers for long-life supercapacitors

Shihang Zhao,Xianbo Yu,Hongmei Chen,Kai Tao,Yaoping Hu,Lei Han

DOI: https://doi.org/10.1039/d0ra01844a

IF: 4.036

2020-01-01

RSC Advances

Abstract:Uniform metal oxides hollow tubular nanofibers have been controllably prepared by calcination strategy using electrospun polymer nanofibers as soft templates and zeolitic imidazolate framework nanoparticles as precursors for long-life supercapacitor.
Layer-By-Layer Assembly of Nanozeolite Based on Polymeric Microsphere: Zeolite Coated Sphere and Hollow Zeolite Sphere

WL Yang,XD Wang,Y Tang,YJ Wang,C Ke,SK Fu

DOI: https://doi.org/10.1081/ma-120004244

2002-01-01

Abstract:Zeolite beta, silicalite-1, ZSM-5, and TS-1 coated spheres have been prepared successfully through layer-by-layer assembly of nanozeolite/ polymer multilayers on polystyrene (PS) microspheres, and hollow zeolite spheres have been obtained by removal of the core by calcination. In the adsorption process of nanozeolites onto the polvelectrolyte-modified template spheres, it has been found that zeta potential of the zeolite colloidal solution that determines the electrostatic interaction has important effects on the zeolite adsorption procedure. The charge on the original sphere template is not necessary. because proper polyelectrolyte modification could change the surface property of the template and make it suitable for layer-by-layer adsorption. The influences of zeolite type and/or size (40-120 nm), the number of zeolite/poly(diallyl-dimethlammonium) layer pairs, and the template sphere size (0.53-10.3 mum) on the preparation of the hollow zeolite spheres were also discussed.
Fabrication and characterization of zein-based nanofibrous scaffolds by an electrospinning method.

Hongliang Jiang,Pengcheng Zhao,Kangjie Zhu

DOI: https://doi.org/10.1002/mabi.200600277

2007-01-01

Macromolecular Bioscience

Abstract:Electrospun zein membranes were prepared using DMF as solvent. By changing the solution concentration, the electrospinning voltage and the distance between the spinneret and collector, nanofibrous meshes without bead defects could be obtained. In order to improve the mechanical strength of the hydrated zein meshes, core-shell-structured nanofibrous membranes with PCL as the core material and zein forming the shell were prepared by coaxial electrospinning. The core-shell structure of the composite fibers was confirmed by SEM characterization of the fibers, either extracted with chloroform to remove the inner PCL, or elongated to expose their cross-section. The composition and average diameter of the composite fibers could be modulated by the feed rate of the inner PCL solution. It was found that the core-shell fibrous membranes have similar wettability to the electrospun zein mesh. The presence of PCL in the fibers could significantly improve the mechanical properties of the zein membrane.
Surface Patterned Porous Films by Convection-Assisted Dynamic Self-Assembly of Zeolite Nanoparticles.

HT Wang,ZB Wang,LM Huang,A Mitra,YS Yan

DOI: https://doi.org/10.1021/la0102509

IF: 3.9

2001-01-01

Langmuir

Abstract:This study demonstrates for the first time that porous zeolite films with surface patterns such as knotted-rope web and wrinkled honeycomb can be obtained by convection-assisted dynamic self-assembly of zeolite nanoparticles. The study also shows that an appropriate dispersant and the presence of zeolite nanoparticles with a specific range of particle sizes in the colloidal suspension are critical for pattern formation. The patterned zeolite films have a well-defined bimodal pore size distribution (i.e., 0.55 and 2.6 nm) with a high Brunauer-Emmett-Teller surface area of 680-750 m(2)/g and are attractive for potential applications in fields such as thin film catalysis, adsorption separation, chemical sensor arrays, and components in microelectronic devices.
High-Performance Zeolite Naa Membranes on Polymer-Zeolite Composite Hollow Fiber Supports

Qinqin Ge,Zhengbao Wang,Yushan Yan

DOI: https://doi.org/10.1021/ja9082057

IF: 15

2009-01-01

Journal of the American Chemical Society

Abstract:We report a new strategy: use of polymer-zeolite composite hollow fibers as supports. Zeolite membranes with high performance (flux = 8.0-9.0 kg m(-2) h(-1), alpha >10000) can be synthesized directly on polymer-zeolite composite hollow fiber supports by a single in situ hydrothermal crystallization. The zeolite crystals imbedded in the polymer hollow fiber serve as seeds for the zeolite membrane growth, and they also "anchor" the zeolite membrane to the support to increase the adhesion of the zeolite membrane. Therefore, a separate and often complex seeding process can be omitted. A very uniform crystal distribution can be obtained easily, so continuous zeolite membranes can be prepared with high reproducibility. These composite hollow fibers can be produced simply by blending zeolite crystals into the polymer feed before the hollow fiber extrusion and thus are expected to be inexpensive.
Fabrication of Hierarchically Structured Zeolites Through Layer-By-Layer Assembly of Zeolite Nanocrystals on Diatom Templates

YJ Wang,Y Tang,XD Wang,AG Dong,W Shan,Z Gao

DOI: https://doi.org/10.1246/cl.2001.1118

2001-01-01

Chemistry Letters

Abstract:Zeolites with hierarchical structure were prepared through layer-by-layer electrostatic assembly of zeolite nanocrystals on the diatom substrate. The thickness and composition of the zeolite coatings on the diatom could be readily tailored by varying the number of deposition cycles and the zeolite types used, respectively.
Fabrication of Ordered Porous Structures by Self-Assembly of Zeolite Nanocrystals

LM Huang,ZB Wang,JY Sun,L Miao,QZ Li,YS Yan,DY Zhao

DOI: https://doi.org/10.1021/ja994240u

IF: 15

2000-01-01

Journal of the American Chemical Society

Abstract:ADVERTISEMENT RETURN TO ISSUEPREVCommunicationNEXTFabrication of Ordered Porous Structures by Self-Assembly of Zeolite NanocrystalsLimin Huang, Zhengbao Wang, Jinyu Sun, Lei Miao, Quanzhi Li, Yushan Yan, and Dongyuan ZhaoView Author Information Department of Chemistry, Fudan University Shanghai 200433, P. R. China Department of Chemical and Environmental Engineering University of California, Riverside, California 92521 Cite this: J. Am. Chem. Soc. 2000, 122, 14, 3530–3531Publication Date (Web):March 22, 2000Publication History Received6 December 1999Published online22 March 2000Published inissue 1 April 2000https://pubs.acs.org/doi/10.1021/ja994240uhttps://doi.org/10.1021/ja994240urapid-communicationACS PublicationsCopyright © 2000 American Chemical SocietyRequest reuse permissionsArticle Views4890Altmetric-Citations250LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-AlertscloseSupporting Info (1)»Supporting Information Supporting Information SUBJECTS:Ethanol,Fibers,Membranes,Nanocrystals,Zeolites Get e-Alerts
Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

J HUANG,S LIU,Y WANG,Z YE

DOI: https://doi.org/10.1016/j.apsusc.2008.03.150

IF: 6.7

2008-01-01

Applied Surface Science

Abstract:We have demonstrated the crystalline ZnO–Al2O3 core–shell nanowire structure by atomic layer deposition (ALD) at a temperature 100°C. The core–shell structure could have potential applications in the fabrication of ZnO field effect transistor. After dissolving the ZnO core, shape defined, rigid and robust crystalline Al2O3 shelled nanostructures have been fabricated. Nanowire ZnO nanostructures have been replicated by alumina shell. This is one of the most effective techniques for producing core–shell or shell/hollowed nanostructures of any desired objects. The Al2O3 shelled nanostructures could have potential applications as space confined nanoreactors, drug delivery, nanofluidic channels and optical transmitting.
Zeolite membranes on hollow fiber supports

Zhengbao Wang,Qinqin Ge,Jia Shao,Yushan Yan

2009-01-01

Abstract:Zeolite membrane separation has been considered an attractive alternative to distillation, but the lack of a membrane that simultaneously has high flux, high separation factor and ability to form a compact module has prevented its widespread commercial use. Here we report that a zeolite NaA membrane with high flux of 9.0 kg/m2h and high water/ethanol separation factor of 10,000 can be formed on a ceramic hollow fiber that is known for its ability to form a compact module. A novel seeding method, dipcoating-wiping, is key to obtaining zeolite membranes on hollow fibers with high separation performance because it reproducibly produces a uniform and trace layer of on the support.
Hierarchical porous structures by using zeolite nanocrystals as building blocks

Limin Huang,Zhengbao Wang,Huanting Wang,Jinyu Sun,Quanzhi Li,Dongyuan Zhao,Yushan Yan

DOI: https://doi.org/10.1016/S1387-1811(01)00332-8

IF: 5.876

2001-01-01

Microporous and Mesoporous Materials

Abstract:Hierarchical porous structures have been fabricated using colloidal zeolite silicalite nanocrystals as building blocks. Continuous, uniform, optically transparent and self-standing silicalite membranes with well-defined shapes and controlled mesoporosity were obtained by self-assembly of zeolite nanocrystals followed by high-pressure compression and controlled secondary crystal growth via microwave treatment. The thickness of the compact self-standing membranes is tunable from 20 μm to several millimeters by simply using different surface weight densities. Controlled secondary growth via microwave treatment leads to a stronger self-standing membrane with controlled mesoporosity and has little effect on its thickness, crystallinity, micropore surface area and micropore volume.
Fabrication of Hollow Zeolite Spheres

XD Wang,WL Yang,Y Tang,YJ Wang,SK Fu,Z Gao

DOI: https://doi.org/10.1039/b006539k

IF: 4.9

2000-01-01

Chemical Communications

Abstract:Hollow spheres of zeolite have been fabricated through a layer-by-layer technique using polystyrene spheres as templates and nanozeolites as ‘building blocks’, followed by calcination.
Synthesis,Properties,Assembly and Application of Nanosized Zeolite

王亚军,唐颐,王星东

DOI: https://doi.org/10.3321/j.issn:1000-8144.2002.03.014

2002-01-01

Abstract:This paper reviews the synthesis of nanosized silicalite-1,ZSM-5,TS-1,beta,A and Y zeolite.Low-temperature hydrothermal crystallization is the ideal approach for obtaining discrete zeolite colloids with crystal size of less than 100 nm.Other methods,such as confined-space crystallization,peso-solid phase crystallization etc.are also possible for obtaining zeolites with nanosized particles.Dispersed nanosized zeolites have typical colloidal properties such as high external surface area,abundant surface hydroxyl and self-aggregation properties.Zeta potential of colloidal zeolites changes with pH,zeolite composition,crystal size,and structures.The nanozeolites possessed some unique physico-chemical properties which are different from those of the large crystal zeolites.With high dispersibility and abundant surface hydroxyls,nanozeolites are perfect building blocks in nano-assembly technology.Using the assembly properties of nanozeolites,various hierarchical structured zeolite materials have been successfully fabricated.In some of the applications in catalyst field,nanosized zeolites also have the merits of high activity,long lifetime and special selectivity.
Hierarchical zeolite structures with designed shape by gel-casting of colloidal nanocrystal suspensions

Huanting Wang,Limin Huang,Zhengbao Wang,Anupam Mitra,Yushan Yan

DOI: https://doi.org/10.1039/b104275k

IF: 4.9

2001-01-01

Chemical Communications

Abstract:Hierarchical zeolite structures with designed shapes were fabricated by a ceramic processing method—gel-casting of colloidal nanocrytal suspensions.
High Performance Zeolite Lta Pervaporation Membranes on Ceramic Hollow Fibers by Dipcoating-Wiping Seed Deposition

Zhengbao Wang,Qinqin Ge,Jia Shao,Yushan Yan

DOI: https://doi.org/10.1021/ja901626d

IF: 15

2009-01-01

Journal of the American Chemical Society

Abstract:We demonstrate for the first time that by one single hydrothermal synthesis a zeolite LTA membrane with a high flux of 9.0 kg/m(2) h and high water/ethanol separation factor of 10000 could be formed on a ceramic hollow fiber that is known for its ability to form a compact module. The flux is the highest reported in the literatures. A novel seeding method, dipcoating-wiping, is key to obtaining zeolite membranes with high separation performance because it reproducibly produces a uniform and trace seed layer on the support. This new seeding method is expected to have serious implications for making defect-free zeolite films and membranes for many applications. The membranes reported here have the potential to solve the key problems that have prevented zeolite membranes from widespread use for biofuel production.
Surface Patterns by Solvent Evaporation of Colloidal Zeolite Suspension

Wang Huanting,Wang Zhengbao,Huang Limin,Mitra Anupam,Yan Yushan

DOI: https://doi.org/10.1557/proc-676-y1.4

2011-01-01

Abstract:Surface patterns of porous zeolite structures such as knotted-rope web and wrinkled honeycomb were obtained by dynamic self-assembly of zeolite nanoparticles during solvent evaporation of colloidal zeolite suspension. The study shows that extra ethanol in zeolite synthesis solution is crucial for pattern formation. The addition of ethanol helps produce zeolite nanoparticles with a specific range of particle size during the hydrothermal synthesis. It also provides uniform dynamic driving force for pattern formation during its preferential evaporation. In addition, surface patterns vary with suspension compositions. The patterned zeolite structures have a well-defined bimodal pore size distribution (i.e., 0.55 nm and 2.6 nm) with high BET surface area of 680∼750m2&/g.
Induction of Zeolite Membrane Formation by Implanting Zeolite Crystals into the Precursor of Ceramic Supports

Yanwei Yang,Nanke Ma,Xiaoke Wu,Xiaofei Lu,Zhengchi Yin,Huayu Zhang,Zhengbao Wang

DOI: https://doi.org/10.1016/j.memsci.2021.119452

IF: 9.5

2021-01-01

Journal of Membrane Science

Abstract:Zeolite membranes are broadly applied in separation, catalysis, and sensor, yet challenges remain in the preparation process. The design of support is an important component to simplify the synthesis protocol and improve the repeatability. Herein, we present a facile and universal strategy to fabricate high-performance zeolite membranes via engineering the skeleton of hollow fiber supports, on which a variety of high-performance zeolite membranes (e.g., MFI, LTA and FAU) can be obtained just by in-situ crystallization without any modification. The "reactive" support is fabricated by implanting zeolite crystals (e.g., NaA) in the precursor of porous ceramic alumina support. Being dissolved under alkaline condition of the synthesis solution, the zeolite calcination transformant (e.g., NaA-Cal) produced in the support during sintering process can effectively form nucleation sites on the support surface, and continuously provide active species to ensure the continuity of the membrane. This study contributes new insights into the importance of supports for high-performance zeolite membranes. Meanwhile, the synthetic methodology is expected to expand the preparation method of zeolite membranes and promote the large-scale application of zeolite membranes.

Electrophoretic Assembly of Nanozeolites: Zeolite Coated Fibers and Hollow Zeolite Fibers

Fabrication of hollow zeotite fibers by electrophoretic assembly of nanosilicalite-1

Layer-by-layer assembly of nanozeolite - Zeolite coated fibers and hollow zeolite fibers

Fabrication of Hollow Zeolite Fibers Through Layer-by-Layer Adsorption Method

Fabrication of Zeolite Naa Membranes on Hollow Fibers Using Nano-Sized Seeds Exfoliated from Mesoporous Zeolite Crystals

Zeolitic imidazolate framework derived ZnCo<sub>2</sub>O<sub>4</sub> hollow tubular nanofibers for long-life supercapacitors

Layer-By-Layer Assembly of Nanozeolite Based on Polymeric Microsphere: Zeolite Coated Sphere and Hollow Zeolite Sphere

Fabrication and characterization of zein-based nanofibrous scaffolds by an electrospinning method.

Surface Patterned Porous Films by Convection-Assisted Dynamic Self-Assembly of Zeolite Nanoparticles.

High-Performance Zeolite Naa Membranes on Polymer-Zeolite Composite Hollow Fiber Supports

Fabrication of Hierarchically Structured Zeolites Through Layer-By-Layer Assembly of Zeolite Nanocrystals on Diatom Templates

Fabrication of Ordered Porous Structures by Self-Assembly of Zeolite Nanocrystals

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Zeolite membranes on hollow fiber supports

Hierarchical porous structures by using zeolite nanocrystals as building blocks

Fabrication of Hollow Zeolite Spheres

Synthesis,Properties,Assembly and Application of Nanosized Zeolite

Hierarchical zeolite structures with designed shape by gel-casting of colloidal nanocrystal suspensions

High Performance Zeolite Lta Pervaporation Membranes on Ceramic Hollow Fibers by Dipcoating-Wiping Seed Deposition

Surface Patterns by Solvent Evaporation of Colloidal Zeolite Suspension

Induction of Zeolite Membrane Formation by Implanting Zeolite Crystals into the Precursor of Ceramic Supports