Abstract:For further knowledge about the refining performance of AlTiC master alloys, A15.5Ti0.25C and A16.5Ti0.5C master alloys containing high Ti and C content were prepared and used in grain refining experiments of 99.8% commercial pure aluminum(CPAl). Their performance was compared with two types of Al5Ti1B refiners whose performance was nowadays considered to be the best. These two types of master alloys show similar refining efficiency at the addition level of 0.2%. However, at the addition level of 0.5%, there still exists great performance difference between AlTiC and Al5TiB alloys in grain refinement of 99.98% and 99.995% high purity aluminum(HPAl). The growth of columnar grains is fully suppressed due to the refinement of AlTiC at the addition level of 0.5%. Also, at the same addition level, the grain refining experiments of A13Ti0.15C and A15Ti0.2C master alloys which have found initial commercial applications are conducted in the above-mentioned three types of pure aluminum. According to the experimental results, these two refiners of different compositions are both nonideal. The second phase particles extracted from each refiner were observed through TEM, while the nuclei of grains after grain refinement were observed through SEM. The results were analyzed through computation and comparison of the constitutional-supercooling parameter and the growth-restriction parameter whose values were determined by solute element in aluminum melt with different purity. Apparently, AlTiC master alloys with high content of Ti and C element have great refining potential.

Research Progress of Al-Ti-B Grain Refiner

Research of Grain Refining on Pure Al by Three Different Master Alloys

Optimization of Processing Parameters for Preparation of Al-3Ti-1B Grain Refiner

On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Master Alloys

Microstructure of Al-Ti-B-RE Master Alloy and Its Mechanism of Refining Pure Aluminum

Development of Grain Refinement in Aluminium Field

STUDY ON THE MICROSTRUCTURES AND GRAIN REFINING PERFORMANCE OF Al-Ti-C GRAIN REFINING MASTER ALLOYS

Performance Comparison of AlTiC and AlTiB Master Alloys in Grain Refinement of Commercial and High Purity Aluminum

Recent Development in Research of AlTiC Master Alloy

Refinement of Tib2 in Al-Ti-B Grain Refiner Alloys by Ultrasound and the Effect on Al Grain Size

The Grain Refinement of 1070 Alloy by Different Al-Ti-B Mater Alloys and Its Influence on the Electrical Conductivity

Development Process and Future Trends of Chemical Refining Agents' Influence on Grain Refinement in Aluminum Alloys

Progress of Study of Al-Ti-C Master Alloy

Effect of High-intensity Ultrasonic on the Microstructure and Grain Refinement of Al-5Ti-1B Master Alloy

The Behavior of AlTiC Master Alloys in Grain Refining of Commercial and High Pure Aluminum

The grain refinement of high-purity aluminum by aluminum-transition metal alloys

Refining Performance and Long Time Efficiency of Al-Ti-B-RE Master Alloy

Influence of high-intensity ultrasound on grain refining performance of Al–5Ti–1B master alloy on aluminium

Research on Precipitation of Second Phases for Al-Ti-B Master Alloy Refiner

Grain refining performance of Al–Ti master alloys with different microstructures

Design of Newly Effective Grain Refiner for Aluminum Based on Medium-Entropy Metal Diboride