Abstract:Industries largely rely on empirical tests to determine what composition and amount of TiBAl grain refiners to add during the casting of aluminum alloy for cast grain structure refinement. TiBAl grain refiners are aluminum master alloys having intermetallic particles within the aluminum matrix, these particles are mainly made of Ti and Al borides, having higher melting point than aluminum matrix. Addition of them to the melt, induces heterogeneous nucleation of aluminum cast grain structures, which promotes solidification of fine equiaxed grains at expense of columnar grain structures. This yields in grain refinement of cast structures, and is beneficial to mechanical and surface treatment properties on the final product. Very often in industrial practice during casting, whether a grain refiner is suitable for a given alloy, the amount to be added in the melt, and what cooling rates to use, are questions remain and reaching the balance becomes a cumbersome practice, and leads to pernicious material's properties. This study aims to explore the refinement efficiency of three variants of locally supplied TiBAl grain refiners on the microstructure of cast pure aluminum (CPAl). A standard test method of TP-1 was adopted and the efficiency of TiBAl grain refiners was determined according to the average grain sizes. It was found that Al-3Ti-1B alloys from different suppliers yield different grain sizes, however, Al-5Ti-1B alloy has better efficiency than Al-3Ti-1B alloy system on CPAl material. The optimum holding time for CPAl melt at 750°C is 5 minutes to achieve a fine grain size.

Refining Performance and Long Time Efficiency of Al-Ti-B-RE Master Alloy

Microstructure of Al-Ti-B-RE Master Alloy and Its Mechanism of Refining Pure Aluminum

Synergistic Effect of RE (La, Er, Y, Ce) and Al-5Ti-B on the Microstructure and Mechanical Properties of 6111Aluminum Alloy

Performance Comparison of AlTiC and AlTiB Master Alloys in Grain Refinement of Commercial and High Purity Aluminum

Research of Grain Refining on Pure Al by Three Different Master Alloys

STUDY ON THE MICROSTRUCTURES AND GRAIN REFINING PERFORMANCE OF Al-Ti-C GRAIN REFINING MASTER ALLOYS

Optimization of Processing Parameters for Preparation of Al-3Ti-1B Grain Refiner

Research on Precipitation of Second Phases for Al-Ti-B Master Alloy Refiner

Grain Refinement Mechanism of Al-5Ti-1B Master Alloy by Ab Initio Calculations

Research Progress of Al-Ti-B Grain Refiner

Recent Development in Research of AlTiC Master Alloy

The Behavior of AlTiC Master Alloys in Grain Refining of Commercial and High Pure Aluminum

The Grain Refinement of 1070 Alloy by Different Al-Ti-B Mater Alloys and Its Influence on the Electrical Conductivity

Synthesis of Al-5Ti-1B-1Ce alloy from remelted chips and its refinement effect

A Novel Al-Ti-C-B-Ce Alloy Preparation Process and Its Refinement Effect to A356 Alloy

Influences of Preparation Conditions and Melt Treatment Procedures on Melt Treatment Performance of Al-5Ti-B and Al-10Sr Master Alloys

Efficiency of different commercial TiBAl grain refiners on refinement of pure aluminum cast structures

Microstructure And Grain Refining Performance Of A Rapidly Solidified Al-5ti-1b Master Alloy

REFINING METAMORPHOSE OF RECYCLED MELT ALUMINUM ALLOY

Study on Grain Refinement of A357 Alloy Using Al-5Ti-1B

Grain refinement of A356 alloy by Al–Ti–B–C master alloy and its effect on mechanical properties