Abstract:Coal mining is going deeper into the ground, resulting in more intense and frequent mine dynamic disasters. To ensure the early warning of dynamic disasters, it is significant to accurately reveal the differences of acoustic emission (AE) signals generated by rock fractures. This paper focuses on studying how AEs average frequency (AF) and rise angle (RA) change in sandstone during loading, and examines the characteristics of waveform amplitude, energy, and frequency distribution of AE signals from different types of fractures. The findings reveal that the percentage of shear fracture gradually increases with increasing load, and the energy activity of the AE signal is significantly enhanced in the high stress stage. The occurrence of the main fracture was preceded by a large number of low-frequency tensile fracture AE signals, accompanied by a small decrease in RA and a small increase in AF. The spectra of different fracture signals were characterized as "low anomalous F" for shear fractures, "vertical F" for low-frequency tensile fractures, and "high anomalous F" for high-frequency tensile fractures. Their energy distribution in the frequency domain was respectively described as "peak-centered distribution", "pillar-shaped distribution" and "peak-skewed distribution". The outcomes of the decomposition and reconstruction from the P- and S-waves reveal that the P wave energy (Ep) dominates in the high-frequency tensile fracture AE signal, while the S wave energy (Es) is greater in the low-frequency tensile fracture and the shear fracture AE signals. The E S /E P threshold value for laboratory discrimination of tensile and shear fracture is 3, as the fracture extends and penetrates, the E S /E P value rises rapidly at the appearance of macroscopic fracture. The findings offer theoretical guidance for monitoring and early warning of coal and rock dynamic hazards as well as revealing the morphology of fracture source.

Study on the AE Characteristics of Fracture Process of Mortar, Concrete and Steel-Fiber-reinforced Concrete Beams

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

AE feature extraction and signal representation model based on wavelet packet decomposition

STUDY ON MICROSTRUCTURE FRACTURE OF CEMENT-BASED COMPOSITES BY ACOUSTIC EMISSION TECHNIQUE

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Acoustic Emission Monitoring of Concrete Columns and Beams Strengthened with Fiber Reinforced Polymer Sheets

Study of the Influence of Aggregate Size Distribution on Mechanical Properties of Concrete by Acoustic Emission Technique

STUDY ON THE BRITTLENFSS OF CEMENT-BASED COMPOSITE BY ACOUSTIC EMISSION TECHNIQUE

Investigation of Ultrahigh-Performance Concrete Fracture Characteristics with Different Steel Fiber Fractions Based on Acoustic Emission

To Monitor Fracture Behaviors in Four-Point Cyclic Bending Tests of Low-Activated High Alumina Concrete and Standard Concrete RC Beams Using Acoustic Emission Technique

Damage location, quantification and characterization of steel-concrete composite beams using acoustic emission

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

Studying the dynamic damage failure of concrete based on acoustic emission

Experimental Study on Acoustic Emission Characteristics of Concrete Failure Process under Uniaxial Tension

Monitoring and evaluation of concrete damage based on acoustic emission technique

Response characteristics of acoustic emission signal and judgment criteria for different fracture modes

Damage evaluation and failure mechanism analysis of steel tube confined reinforced-concrete columns by acoustic emission technology

Analysis of Compressive Fracture Process in 3D Braided Composites by Acoustic Emission

Acoustic Emission Characterization of the Fracture Process in Fly Ash Fiber–Reinforced Asphalt Concrete