Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Dynamic model of liquid bridge profile in short-circuit transfer of GMAW

Analysis and Forecase of Dynamic GMAW System on Short Circuit Transfer

Numerical Model of Rail Flash Welding Liquid Bridge Heating Process

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

Analysis of weld pool dynamic during stationary laser–MIG hybrid welding

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Numerical Analysis of Liquid Bridge Transfer in Wire Arc Additive Manufacture Process of TA31 Titanium Alloy

Instantaneous short circuit in short circuiting transfer process in GMAW

Understanding of the Weld Pool Convection in Twin-Wire GMAW Process

An Improved Simulation Model for Three-Wire Gas Metal Arc Welding

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Modeling of droplet short-circuiting transfer and simulation of three-dimensional transient behavior of molten pool

3d Multiphysical Modelling Of Fluid Dynamics And Mass Transfer In Laser Welding Of Dissimilar Materials

Analysis and control of short-circuit experience in short-circuit CO2 welding

Numerical Simulation of Hump Suppression in High-Speed Triple-Wire GMAW

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

Understanding of Humping Formation and Suppression Mechanisms Using the Numerical Simulation

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Modeling of Droplet Transfer Electrical Characteristics in Pulsed Gas Melted Arc Welding

Investigation of Plasma and Metal Transfer Dynamic Behavior During Fiber Laser GMAW-P Hybrid Welding