Abstract:Light-wood frame structure system came into being in North America in middle period of 19th century and has a history of more than one hundred years. At present light-wood frame structure system is widespread in many countries and already became an important structure system. So far, researches on the structure system mainly focus on computing and testing of structure members, and study on the integral performance including seismic performance and shear performance is comparatively few. For the integral structure, modes, story drifts, internal forces of the members under the loads such as seismic loads are important and necessary which can only be obtained through integral analysis of the whole structure instead of computing and testing of a single member. In the paper finite element analysis of integral performance of a modern low-rise light-wood frame structure building in Beijing is carried out using finite element software based on the design criteria in China. Then the modes of the structure are solved by modal analysis and internal forces and deformations in appointed load cases which are the combinations of loads including seismic loads are also solved. Further, seismic performance and shear performance of the structure are analyzed. The load case results show the internal forces and displacements of the structure meet the requirements of design criteria in China and the structural safety margin is ample. It indicates the design of the frames has an appropriate security. Modal analysis results show the structure has a good integrity and potential weak positions of the structure can also be found. The light-wood frame structure system has a good seismic performance because of its light weight and big damping ratio. The results of the paper validate the viewpoint sufficiently. Contours of shear forces of the wall in wind loads and seismic loads are also given in the paper. The results indicate the structural methods of interior walls can meet the requirements of shear resistance, while shear forces of partial exterior walls exceed the design strength of shear resistance. So construction methods such as using thicker wallboards or adding steel members should be adopted to strengthen the positions.

Research of Monotonic Loading Test for Light-frame Shear Wall Mading of Imported OSB or Domestic plywood

Experimental Studies of Light-Weight Woodframe Shear Walls with Ply-Bamboo Sheathing Panels

LATERAL RESISTANCE OF LIGHTWEIGHT WOOD AND BAMBOO SHEAR WALLS

Lightweight Woodframe Shear Walls with Ply-Bamboo Sheathings

Lateral Loading Performance of Lightweight Glubam Shear Walls

Seismic Behavior of Cold-Formed Steel Frame Shear Walls Sheathed with Ply-Bamboo Panels

Performance of Connection System Used in Lightweight Glubam Shear Wall

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Connections Used for Cold-Formed Steel Frame Shear Walls Sheathed with Engineered Bamboo Panels

Monotonic and cyclic tests of round bamboo shear walls

Experimental Research on Standardized Bamboo Culm Components for Developing Prefabricated Bamboo Building

Experimental Research and Application of Prefabricated Bamboo Pole House

Experimental research on fire safety of lightweight bamboo frame buildings

Research and applicant of lightweight glue-laminated bamboo frame structure

Test study for the performance of wood-cold-formed steel frame shear walls with difference detailed configurations

Lateral Force Resistance Performance of Sheathing Sandwiched Wood Shear Walls

Shear resistance for lateral force of light-frame wall sheathed with structural particleboard (PB)

Study on integral performance of a modern low-rise lightwood frame structure building

Seismic performance of Chinese traditional timber frames

Review of Studies on Performance of Dowel Connections Loaded Perpendicular to Grain