Abstract:In order to develop multi-functional silk materials, silk was grafted using the first flame retardant monomer, dimethyl methacryloyloxyethyl phosphate (DMMEP), and the second antibacterial monomer, dimethylaminoethyl methacrylate (DMAEMA), via atom transfer radical polymerization (ATRP) method. The result of attenuated total reflection-Fourier transformed infrared spectroscopy (ATR-FTIR) indicated that two monomers were successfully grafted onto silk surface. X-ray diffraction (XRD) curves showed that grafting mainly occurred at the amorphous region of silk fibers. Thermal gravimetric analysis (TGA) and flame retardance measurements indicated that the Silk-grafted-poly(DMMEP) (Silk-g-PDMMEP) and Silk-grafted-poly(DMMEP)-blocked-poly(DMAEMA) (Silk-g-PDMMEP-b-PDMAEMA) both had good flame retardance. The LOI value could reach 31.2% and the char length was less than 6cm for the Silk-g-PDMMEP sample with 22.21% of grafting percentage, and the LOI value was still over 28% after 50 times of washing. And the second grafts of DMAEMA monomer had no distinct effect on the flame retardance of Silk-g-PDMMEP. The inhibition rates of quaternized grafted silk to Staphylococcus aureu and Escherichia coli were both over 88%, and had excellent washing fastness. Multi-functional silk fabric with good flame retardance and anti-bacterial property could be obtained by properly controlling the grafting percentage, which had little effect on the intrinsic properties of silk fabric.

Technological Process Optimization Experiment on Water Repellence Finishing of Silk Fabric Grafted with Fluorinated Acrylate via ATRP Method

Structure and Properties of Silk Grafted with Acrylate Fluoride Monomers by ATRP

Preparation of Water-Repellent Silk by Graft Modification with Hexafluorobutyl Acrylate

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Technological Conditions of Silk Grafting Modification Using Atom Transfer Radical Polymerization Method

Surface Grafting Modification of Silk Fibroin via ARGET ATRP Method

Modification of Silk Fiber Via Emulsion Graft Copolymerization with Fluoroacrylate

Surface Modification of Cotton Fabric to Create Water Repellence Property Via Atom Transfer Radical Polymerization

Graft Modification of Silk Using Hexafluorobutyl Mathacrylate

Study of Properties of Silk Grafted with Fluoride Monomers

Structure and Hydrophobicity of Silk Fabric Grafted with Octafluoropentyl Methyl Acrylate

Preparation, Structure and Properties of Multi-Functional Silk Via ATRP Method

Synthesis of Octafluoropentyl Methyl Acrylate and Its Grafting Modification on Silk

Study on the Grafting of HEMA on Silk Surface Via ATRP Method

Graft Modification of Organic Phosphorous Flame-retardant Onto Silk Fabric

Modification of silk fabric with 4-nonafluorobutyl-4 '-azobenzene by grafting polymerization and its reversible hydrophobicity-hydrophilicity response

Preparation, Structure, and Properties of Silk Fabric Grafted with 2-Hydroxypropyl Methacrylate Using the HRP Biocatalyzed ATRP Method

Surface Grafting Modification of Silk Fibroin by Atom Transfer Radical Polymerization

Grafting of 2-Hydroxyethyl Methacrylate onto Silk by Atom Transfer Radical Polymerization

Structure and Properties of Cotton Grafted Using Trifluoroethyl Methacrylate Via ATRP Method

Grafting of 2-Diethylaminoethyl Methacrylate Onto Silk by ATRP