Abstract:<p>Polypropylene (PP) has been commonly used as packaging materials due to the favorable mechanical and optical properties related to its diverse and complex chain microstructure which can be better understood through effective fractionation. In this work, two commercial PP resins (A and B) with similar bimodal melting temperature distribution in the range of 100–160 °C but different ethylene content (9.1–12.3 mol%) are fractionated by preparative temperature rising elution fractionation (P-TREF) and relevant fractions are characterized by a variety of techniques such as high temperature-gel permeation chromatography (HT-GPC), differential scanning calorimetry (DSC), <sup>13</sup>C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform-infrared (FT-IR) spectroscopy, and wide-angle X-ray diffraction (WAXD). The chain microstructures of the two resins used as food packaging film exhibit heterogeneity and some differences, which are mainly caused by broad and different distribution of ethylene comonomers. Resin B contains more ethylene units than resin A, and the ethylene units are incorporated into the PP chains in the forms of individual unit or very short segments, resulting in large amount of fractions with relatively low isotacticity and crystallinity that eluted at the temperature range of 35–90 °C. These fractions account for 84.07 wt% of resin B, whereas 59.66 wt% of resin A. The propylene sequences of different isotacticity and crystallinity generated by the insertion of ethylene comonomers in resin B are mainly responsible for its biomodal melting behavior. However, ethylene comonomers tend to insert into the PP chains of resin A in the forms of long polyethylene (PE) blocks and generate propylene−ethylene block copolymers with high crystallizability which can be eluted at high temperatures of 120–140 °C. These fractions constitute 3.16 wt% of resin A, but barely exist in resin B. Moreover, 35.83 wt% of resin A were eluted at 110 °C, whereas only 13.22 wt% of resin B can be eluted at this temperature. These fractions with high isotacticity and molecular weight eluted at high temperatures contribute to the higher flexural modulus of resin A. Both long ethylene blocks and propylene sequences of different lengths contribute to the biomodal melting peaks on the thermogram of resin A.</p>

Compositional Differences of Propylene–ethylene Block Copolymers Manufactured by Degradation and Hydrogenation Techniques

Synthesis of Carboxyl-terminated Polyolefins <i>via</i> Metathesis Degradation-hydrogenation of Diene Rubbers

Biobased 1,5-Pentanediol Derived Aliphatic-Aromatic Copolyesters: Synthesis and Thermo-Mechanical Properties of Poly(pentylene Succinate-Co-terephthalate)s and Poly(pentylene Adipate-Co-terephthalate)s

Hydrolytic and Compost Degradation of Biobased PBSF and PBAF Copolyesters with 40–60 Mol% BF Unit

Hydrolytic Degradation Of Biobased Poly(Butylene Succinate-Co-Furandicarboxylate) And Poly(Butylene Adipate-Co-Furandicarboxylate) Copolyesters Under Mild Conditions

Studies on composition and molecular structure of high impact polypropylene

Chain Structure and Mechanical Properties of Ethylene Copolymers in Two Operating Modes of Fluidized Bed Polymerization Reactor

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Separation and identification of ethylene-propylene block copolymer

Study of Crystallization and Melting Behavior of Polypropylene‐block‐polyethylenes Copolymers Fractionated from Polypropylene and Polyethylene Mixtures

Comparison of chain microstructure between two propylene−ethylene copolymer resins with bimodal melting temperature distribution

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

Characterization of Microstructure of Polypropylene Alloys

Crystallization Segregation Dsc Studies of Pp/Pe Copolymers

Study on thermal behavior of impact polypropylene copolymer and its fractions

Thermal fractionation and effect of comonomer distribution on the crystal structure of ethylene–propylene copolymers

Effect of copolymerized ethylene unit on the crystallization behavior of poly(propylene-co-ethylene)s

The Effects of Chemical Structure and Synthesis Method on Photodegradation of Polypropylene

Structure and performance of hydrogenated styrenic block copolymers/polypropylene/oil ( HSBCs / PP /oil) composites

Composition, Thermal Properties, and Biodegradability of A New Biodegradable Aliphatic/Aromatic Copolyester

Rheological Insights into the Degradation Behavior of PP/HDPE Blends