Abstract:Commercially pure titanium specimens are subjected to three different treatments, and their bioactivity are evaluated by immersing the specimens in a simulated body fluid (SBF, Kokubo's recipe) for various periods up to 7 days, with particular attention being paid to the differences in apatite deposition between surfaces open to SBF and surfaces in contact with the container's bottom. The treatment with a H(2)O(2)/HCl solution at 80 degrees C for 30 min followed by heating at 400 degrees C for 1 h produces an anatase titania gel layer on the specimen surface. This gel layer deposits apatite both on the contact and on open surfaces, and apatite deposition ability does not change with pre-staking in distilled water. The treatment with a NaOH solution at 60 degrees C for 3 days produces a sodium titanate gel layer. This gel layer can deposit apatite only on the contact surface, and the apatite deposition ability is completely lost after 1 day of pre-staking in distilled water. It is concluded, therefore, that the bioactivity of the titania gel originates from the favorable structure of the gel itself while the bioactivity of the sodium titanate gel depends heavily on ion release from the gel. The third treatment, a simple heat treatment at 400 degrees C for 1 h, produces a dense (not porous) oxide layer on the specimen surface. The specimens can deposit apatite on the contact surface after only 3 days of staking in SBF, but they cannot deposit apatite on the open surface for up to 2 months of staking. The implications of such apatite deposition behavior have been discussed in relation to the environments of titanium implants in bone as well as to the methodology of the SBF staking experiment.

Study on the Bioactivity of Anodic Oxidized Titanium Alloy Induced by Alkali Treatment

A Comparative Study of in Vitro Apatite Deposition on Heat-, H(2)O(2)-, and NaOH-treated Titanium Surfaces.

Apatite deposition on thermally and anodically oxidized titanium surfaces in a simulated body fluid.

Biomimetic Deposition of Apatite on Electrochemically Oxidized Titanium Substrates

Improvement of Bioactivity of H(2)O(2)/TaCl(5)-treated Titanium after Subsequent Heat Treatments.

Bioactivity of Metallic Biomaterials with Anatase Layers Deposited in Acidic Titanium Tetrafluoride Solution

In Vivo and In Vitro Studies on the Bioactivity of Anodic Oxidized Titanium Metal

Apatite Formation Induced by Alkaline Treatment on Titanium Alloy Substrate

Preparation of bioactive titanium metal via anodic oxidation treatment.

Enhanced Bioactivity of Chemically Oxidization-Modified Titanium Alloys

Effect of Alkali Treatments on Apatite Formation of Microarc-Oxidized Coating on Titanium Alloy Surface

PREPARATION OF BIOACTIVE FILM ON Ti6Al4V

Effect of bioactivity on titanium treated by alkali and acid-alkali

Preparation of Bioactive Titanium Alloy Implant and Its Histological Examination

Preparation, Characterization, in Vitro Bioactivity, and Osteoblast Adhesion of Multi-Level Porous Titania Layer on Titanium by Two-Step Anodization Treatment

Alkali Treatment and Bioactivity of Medical Near beta-Type Titanium Alloy TLM

Alkali and Thermal Treatment of Titanium and Its Effect on the Bioactivity

Preparation of bioactive titanium metal via anodic oxidation treatment in sulphate solution

Influence of nanostructures on the biological properties of Ti implants after anodic oxidation

A High Bioactive Alkali-Treated Titanium Surface Induced by Induction Heat Treatment

[Preparation of Anodic Oxidation Layer on the Surface of Pure Titanium and Its Biological Activity Study].