Abstract:Ethylene/propylene-random-copolymer (PPR)/clay nanocomposites were prepared by two-stage melt blending. Four types of compatibilizers, including an ethylene-octene copolymer grafted maleic anhydride (POE-g-MA) and three maleic-anhydride-grafted polypropylenes (PP-g-MA) with different melt flow indexes (MFI), were used to improve the dispersion of organic clay in matrix. On the other hand, the effects of organic montmorillonite (OMMT) content on the nanocomposite structure in terms of clay dispersion in PPR matrix, thermal behavior and tensile properties were also studied. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the organic clay layers are mainly intercalated and partially exfoliated in the nanocomposites. Moreover, a PP-g-MA compatibilizer (compatibilizer B) having high MFI can greatly increase the interlayer spacing of the clay as compared with other compatibilizers. With the introduction of compatibilizer D (POE-g-MA), most of the clays are dispersed into the POE phase, and the shape of the dispersed OMMT appears elliptic, which differs from the strip of PP-g-MA. Compared with virgin PPR, the Young’s modulus of the nanocomposite evidently increases when a compatibilizer C (PP-g-MA) with medium MFI is used. For the nanocomposites with compatibilizer B and C, their crystallinities (X c) increase as compared with that of the virgin PPR. Furthermore, the increase of OMMT loadings presents little effect on the melt temperature (T m) of the PPR/OMMT nanocomposites, and slight effect on their crystallization temperature (T c). Only compatibilizer B can lead to a marked increases in crystallinity and T c of the nanocomposite when the OMMT content is 2 wt%.

Novel Thermosetting Resins Based on 4‐(n‐maleimido)phenylglycidylether, 4

Novel Thermosetting Resins Based on 4-(N-maleimidophenyl)glycidylether I. Preparation and Characterization of Monomer and Cured Resins

Synthesis and Characterization of a Novel Heat Resistant Epoxy Resin Based on N,N′-bis(5-hydroxy-1-naphthyl)pyromellitic Diimide

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Effects of the Heating Rate and the Amount of Organic Montmorillonite on the Thermal Properties of the Novel Liquid Crystalline Epoxy Nanocomposite

Novel Thermosetting Resins Based on 4-(N-maleimido)phenylglycidylether

A novel method for preparation of exfoliated UV-curable polymer/clay nanocomposites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Dielectric response of modified epoxy/clay nanocomposites

A Novel Polymeric Flame Retardant and Exfoliated Clay Nanocomposites: Preparation and Properties

Liquid-crystalline copolyester/clay nanocomposites

Novel Preparation of Poly(propylene)–layered Silicate Nanocomposites

Study on Structure and Mechanical Properties of Epoxy/clay Nanocomposites Prepared by Shear Dispersing Method

Synthesis Of Epdm/Organoclay Nanocomposites: Effect Of The Clay Exfoliation On Structure And Physical Properties

Morphology and Characterization of Clay-Reinforced Epdm Nanocomposites

Novel Thermosetting Resins Based on 4-(N-maleimidophenyl)glycidylether: II. Bismaleimides and Polybismaleimides

Clay Intercalation and Influence on Flammability and Crystallization Behaviors of POE‐based Nanocomposites

The Preparation of Phenolic Resin/montmorillonite Nanocomposites by Suspension Condensation Polymerization and Their Morphology

Poly(ethylene naphthalate)/clay nanocomposites based on thermally stable trialkylimidazolium-treated montmorillonite: thermal and dynamic mechanical properties

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite