Extraction of Periodic Signals from A Noise Background

L GAMMAITONI,E MENICHELLASAETTA,S SANTUCCI,F MARCHESONI

DOI: https://doi.org/10.1016/0375-9601(89)90159-x

IF: 2.707

1989-01-01

Physics Letters A

Abstract:A simple technique for extracting periodic signals from a noise background is proposed and tested. A selective amplifier circuit has been realized accordingly, which is capable of resolving low-frequency periodic components in short signal samples.

What problem does this paper attempt to address?

Signal processing for ultra-wideband life detection radar based on periodic sampling

Bin Li,Weiwei Fu,Yong Wang

DOI: https://doi.org/10.19650/j.cnki.cjsi.2010.09.010

2010-01-01

Abstract:Aiming at ultra-wideband life detection radar, radar transmission and echo signals were analyzed. A periodic sampling and superposing (PSS) method was proposed. Using a special periodic sampling, this method moves all the human life frequencies to the baseband without loss and superposes them. The periodic sampling and superposing method effectively avoids the life information loss and increases the frequency components of human life. Compared with other signal processing methods, this method has obvious advantages. Based on the principle of ultra-wideband life detection radar, a real ultra-wideband life detection system was built to carry out the actual measurement. Experiment results show that the method can increase the frequency components of human life by about 2dB.
Extracting hidden weak sinusoidal signal with short duration from noisy data: Analytical theory and computational realization

张英,张朝阳,钱弘,胡岗

DOI: https://doi.org/10.1088/1674-1056/26/10/100508

2017-01-01

Chinese Physics B

Abstract:Signal detection is both a fundamental topic of data science and a great challenge for practical engineering. One of the canonical tasks widely investigated is detecting a sinusoidal signal of known frequency ω with time duration T :I（t） = A cos ω t + Γ（t）, embedded within a stationary noisy data. The most direct, and also believed to be the most efficient,method is to compute the Fourier spectral power at ω : B = 2 T T0 I（t） ei ω tdt. Whether one can out-perform the linear Fourier approach by any other nonlinear processing has attracted great interests but so far without a consensus. Neither a rigorous analytic theory has been offered. We revisit the problem of weak signal, strong noise, and finite data length T = O（1）, and propose a signal detection method based on resonant filtering. While we show that the linear approach of resonant filters yield a same signal detection efficiency in the limit of T →∞, for finite time length T = O（1）, our method can improve the signal detection due to the highly nonlinear interactions between various characteristics of a resonant filter in finite time with respect to transient evolution. At the optimal match between the input I（t）, the control parameters, and the initial preparation of the filter state, its performance exceeds the above threshold B considerably. Our results are based on a rigorous analysis of Gaussian processes and the conclusions are supported by numerical computations.
Weak Signal Detection Based on United Denoising and Frequency Modulation

ZHANG Gang,WANG Ying,WANG Yuan

DOI: https://doi.org/10.12733/jics20105115

2014-01-01

Abstract:For the detection of weak signal in strong noise background, a novel method was proposed based on conventional detection method. This method referred to the weak signal detection using autocorrelation jointed with wavelet threshold transformation and frequency modulation. The united denoising system of autocorrelation and wavelet threshold transformation was combined, so the negative impact from the noise was avoided greatly in the detection result. Using standard signal with adjustable frequency to modulate the measured signal frequency, thus the frequency difference of standard signal and the measured signal meet the testing conditions. It broke the restrictions of Duffing oscillator, which can only detect signals with the frequency similar to the system periodic driving force. The twooscillator-difference method is more intuitive, having good anti-noise performance, and the relative error is controlled under 5%. The system has a strong anti-interference, and the minimum signal-to-noise ratio can reach −41 dB. The feasibility and validity of this method were proved by the simulation results.
Weak Signal Extraction in Noise Using Variable-Step Gaussian-Sinusiodal Filter

Haiyang Lou,Rujiang Hao,Jianchao Zhang

DOI: https://doi.org/10.3390/machines12090601

IF: 2.899

2024-09-02

Machines

Abstract:When analyzing vibration or acoustic signals in machinery, noise interference within the characteristic signals can significantly distort the results. This issue is particularly pronounced in complex environments, where mechanical signals are often overwhelmed by noise, making it extremely difficult or even impossible to determine the operational status of mechanical equipment by the analysis of characteristic signals. Existing methods for analyzing weak signals in the presence of strong Gaussian noise have limitations in their effectiveness. This paper proposes an innovative approach that utilizes a Variable-Step Gaussian-Sinusoidal Filter (VSGF) combined with rotational coordinate transformation to extract weak signals from strong noise backgrounds. The proposed method improves noise reduction capabilities and frequency selectivity, showing significant improvements over traditional Gaussian filters. Experimental validation demonstrates that the signal detection accuracy of the proposed method is 10–15% higher than that of conventional Gaussian filters. This paper presents a detailed mathematical analysis, experimental validation, and comparisons with other methods to demonstrate the effectiveness of the proposed approach.

engineering, mechanical, electrical & electronic
Study on weak sound signal separation and pattern recognition under strong background noise in marine engineering

Song Liu,Jiantong Gao,Huayu Zhou,Kang Yang,Panpan Liu,Yifan Du

DOI: https://doi.org/10.1177/14613484241226524

2024-01-20

Journal of Low Frequency Noise Vibration and Active Control

Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The extraction of weak acoustic signals under strong background noise is of great significance in the applications of target identification and localization. In this paper, the pulse signal with high randomness is set as the weak signal sound source, random noise and sine sound are used as the background noise. Under the condition of a signal-to-noise ratio of −20 dB, combined with blind source separation and neural network methods, the collected observation signals are subjected to weak sound signal separation and recognition research. The optimization method of centralization and scaling processing is used to eliminate the unfavorable influence of the uncertainty of the separated signal amplitude caused by the blind source separation method on the pattern recognition. The recognition result is verified by the combination of "weak impulse acoustic signal" and "random noise signal," and the output vector (0.99 0.01 0.01) approaches (1 0 0), which is recognized as impulse acoustic signal. By combining blind source separation and neural network methods, the separation and identification of weak pulse signals under the condition of a signal-to-noise ratio of −20 dB can be achieved.

acoustics
Vital Sign Extraction in the Presence of Radar Mutual Interference.

Zhenyu Liu,Yongan Kong,Xin Zhang,Jiayan Wu,Wei Lu

DOI: https://doi.org/10.1109/lsp.2020.3026942

2020-01-01

IEEE Signal Processing Letters

Abstract:Respiratory, and heartbeat signals are faint vital signs that provide diagnostic, and prophylactic information for detecting physiological state. With the increasing number of scenes equipped with frequency modulated continuous wave radar, the probability of mutual interference between radars increases. Mutual interference may raise the noise floor level, which easily affects the extraction of respiratory, and heartbeat signals. To solve this issue, we propose a method for extracting vital signs. First, we use the improved pruned exact linear time algorithm to determine the position of the interference signal. Then, the interference signal is restored by the autoregressive model. Finally, the residual noise is removed by bandpass filtering, and ensemble empirical mode decomposition to obtain vital signs. The experimental results show that the proposed method can significantly improve the signal-to-noise ratio of vital signs, and effectively extract vital signs from the interference signal.
Event Detection and Period Extraction Using Multi-Scale Symmetry and Entropy

R Jackson,D Pycock,M Xu,M Salous,M Knowles,S Harman

DOI: https://doi.org/10.1016/j.sigpro.2004.10.019

IF: 4.729

2005-01-01

Signal Processing

Abstract:We present a system for detecting discrete periodic events over a short interval and in the presence of interference. In the first stage symmetries are identified using scale-space representation. This process detects signal events with a low signal-to-noise ratio but has the potential to introduce a number of false responses. This process is followed by an entropy-based algorithm that can robustly extract periodicities from a set of observed discrete events in the presence of a large number of false alarms. The event detection and period extraction processes have a low computational cost and can extract signal periodicity after a short observation time. This scheme was evaluated against four previously reported methods. Results demonstrate that the period extraction algorithm presented here is more reliable than three of the previously reported algorithms. The reliability of the algorithm presented here was similar to that of the fourth method but the computational cost was much less.
Study on the Low-frequency Sound Detection

JING E-lin,ZENG Guang-yu,WANG Xiao-xia

2005-01-01

Abstract:This paper puts forward a method based on online programmable analog device ispPAC10's deferential amplification and the low-pass filter circuit for realizing the collection of the low-frequency sound wave signal. The method can effectively reduce noise interference of the detecting circuit and increase signal noise ratio of the output signal.
Nonparametric Extraction of Oscillations in Short Time Series

Xiang Li,Ernst Poeppel,Yan Bao

DOI: https://doi.org/10.1002/pchj.221

IF: 1.559

2018-01-01

PsyCh Journal

Abstract:Oscillations are important for functional homeostasis. However, the oscillatory processes are sometimes masked by noise. A nonparametric method to extract oscillatory components does not assume stability in period or amplitude, it is resistant to linear components and phase insensitive, and it allows statistical inference.
Regularized Periodic Gaussian Process for Nonparametric Sparse Feature Extraction from Noisy Periodic Signals

Yongxiang Li,Yunji Zhang,Jianguo Wu,Min Xie

DOI: https://doi.org/10.1109/tase.2024.3387833

IF: 6.636

2024-01-01

IEEE Transactions on Automation Science and Engineering

Abstract:This study proposes a nonparametric sparse feature extraction approach based on a periodic Gaussian process (PGP) for highly nonlinear sparse periodic signals, which may not be effectively modeled by conventional linear models based on user-specified dictionaries. The PGP model is reformulated as a mixed-effects model. Hence a regularization term is allowed to be imposed on the random effect of the PGP model, called regularized PGP (RPGP) in this study, for sparse feature extraction. Unlike conventional sparse models, the proposed RPGP can simultaneously model fixed and random effects (global trend and local sparsity) of the signals. A computationally scalable algorithm based on the alternating direction method of multipliers (ADMM) is tailored for RPGP to iteratively optimize the fixed and random effects. The efficient computation of RPGP is achieved by a customized circulant-based acceleration technique that utilizes fast Fourier transform on circulant matrices. The performance of RPGP is evaluated through a simulation study on synthetic signals and a case study on real vibration signals. Note to Practitioners —This work is motivated by the problem of sparse feature extraction from highly nonlinear periodic signals with a complex global trend. The key issues involved in this problem include: 1) how to model the highly nonlinear periodic signals; 2) how to separate the periodic signals and the global trend from noisy signals; 3) how to extract the sparse periodic feature. Existing approaches for sparse feature extraction assume that the signals have a constant trend and can be effectively modeled by certain dictionaries. This work proposes a novel approach that leverages a regularized PGP to simultaneously extract the sparse periodic feature and the global trend. Moreover, the nonparametric nature of the PGP model enables automatic feature extraction, eliminating the need to manually select a dictionary for sparse periodic feature extraction. The proposed approach involves four main steps: 1) collecting periodic signals from embedded sensors; 2) modeling the signals with PGP models following the fixed effects framework; 3) training the model parameters using the proposed optimization procedure; 4) extracting the global trend and sparse periodic feature based on the model parameters. This paper demonstrated the application of rolling bearing vibration signals, while the effectiveness of the proposed model is not limited to this topic. Other periodic signals with similar characteristics can also be analyzed by applying the proposed model. In the future, this approach will be extended to handle sparse feature extraction from pseudo-periodic signals in a more complex noise environment.
Multi-scale event detection and period extraction

robert jackson,david pycock,ming xu,mark knowles,stephen a harman

DOI: https://doi.org/10.1049/ic:20000574

2000-01-01

Abstract:We describe a system for detecting complex discrete periodic events by identifying symmetries in their scale-space representation using a medial-axis transform. Whilst allowing events with varying characteristics and very low signal to noise ratios to be detected, this also has the potential to introduce a large number of false alarms. We, therefore, also present an entropy-based algorithm that can robustly extract periodicities from a set of observed events with a large proportion of missing or false alarms. The problem of detecting discrete periodic signals and extracting their characteristics is frequently encountered in communications, radar and speech processing applications. The event detection and period extraction processes described here have a low computational cost and can extract signal periodicity after a short observation time (less that 10 repetitions of the period). We demonstrate a period extraction algorithm that is faster than previously reported algorithms and more robust than many, including those based on histogramming and Kalman filtering. When the number of false alarms equals that of detected events the period is correctly determined in 90% of cases (compared to 40% for a Fourier based algorithm). A technique using circular statistics gives 95% success but requires 10 times more computation
Periodic Signal Recovery and Detection from 1-Bit Measurements Using Convolutional Neural Network

Yinglin Chen,Peng Xiao,Yuxiang Gao,Bo Zhao,Jixing Qin

DOI: https://doi.org/10.1007/s00034-024-02717-y

IF: 2.311

2024-05-24

Circuits Systems and Signal Processing

Abstract:In order to lower the hardware requirements of digital systems and to reduce the amount of collected data, 1-Bit sampling technique has received much attention. Following the trend, in this paper we try to address a classic problem based on the 1-Bit sampling data—the problem of detection and estimation of periodic signals in White Gaussian Noise. To achieve the tasks, the 1-D convolutional neural networks (CNN) are used to recover the waveforms of the periodic signals from the 1-Bit measurements. Subsequently, the method of generalized likelihood ratio test (GLRT) is applied on the recovered waveforms to detect the periodic signals and to estimate their unknown parameters. The simulation results show that CNN can recover the waveforms of periodic signals with a reasonable accuracy, and the parameters of frequency, time delay, initial phase, and relative amplitude can be obtained.

engineering, electrical & electronic
Subnoise detection of a fast random event

V. Ataie,D. Esman,B. P.- P. Kuo,N. Alic,S. Radic

DOI: https://doi.org/10.1126/science.aac8446

IF: 56.9

2015-12-10

Science

Abstract:Observation of random, nonrepetitive phenomena is of critical importance in astronomy, spectroscopy, biology, and remote sensing. Heralded by weak signals, hidden in noise, they pose basic detection challenges. In contrast to repetitive waveforms, a single-instance signal cannot be separated from noise through averaging. Here, we show that a fast, randomly occurring event can be detected and extracted from a noisy background without conventional averaging. An isolated 80-picosecond pulse was received with confidence level exceeding 99%, even when accompanied by noise. Our detector relies on instantaneous spectral cloning and a single-step, coherent field processor. The ability to extract fast, subnoise events is expected to increase detection sensitivity in multiple disciplines. Additionally, the new spectral-cloning receiver can potentially intercept communication signals that are presently considered secure.

multidisciplinary sciences
Extraction of Intrawave Signals Using the Sparse Time-Frequency Representation Method

Peyman Tavallali,Thomas Y. Hou,Zuoqiang Shi

DOI: https://doi.org/10.1137/140957767

2014-01-01

Abstract:Analysis and extraction of strongly frequency modulated signals have been a challenging problem for adaptive data analysis methods, e.g., empirical mode decomposition [N.E. Huang et al., R. Soc. Lond. Proc. Ser. A Math. Phys. Eng. Sci., 454 (1998), pp. 903-995]. In fact, many of the Newtonian dynamical systems, including conservative mechanical systems, are sources of signals with low to strong levels of frequency modulation. Analysis of such signals is an important issue in system identification problems. In this paper, we present a novel method to accurately extract intrawave signals. This method is a descendant of sparse time-frequency representation methods [T.Y. Hou and Z. Shi, Appl. Comput. Harmon. Anal., 35 (2013), pp. 284-308, T.Y. Hou and Z. Shi, Adv. Adapt. Data Anal., 3 (2011), pp. 1-28]. We will present numerical examples to show the performance of this new algorithm. Theoretical analysis of convergence of the algorithm is also presented as a support for the method. We will show that the algorithm is stable to noise perturbation as well.
Extracting Periodic Driving Signal from Chaotic Noise *

J Mu,C Tao,GH Du

DOI: https://doi.org/10.1080/10020070312331344210

2003-01-01

Abstract:After periodic signals pass through some nonlinear systems, they are usually transformed into noise-like and wide-bandchaotic signals. The discrete spectrums of the original periodic signals are often covered by the chaotic spectrums. Recovering the periodicdriving signals from the chaotic signals is important not only in theory but also in practical applications. Based on the modeling theory ofnonlinear dynamic system, a "polynomial-simple harmonic drive" non-autonomous equation （P-S equation） to approximate the original sys-tem is proposed and the approximation error between P-S equation and the original system is obtained. By changing the drive frequency,we obtain the curve of the approximation error vs. drive frequency. Based on the relation between this curve and the spectrums of the orig-inal periodic signals, the spectrum of the original driving signal is extracted and the original signal is recovered.
The Research on Pitch Extraction Method for Voice Activity Detection Based on Periodic Decomposition

LIU Haibo,LI Hui,LING Zhenhua

DOI: https://doi.org/10.3969/j.issn.0253-2778.2012.02.004

2012-01-01

Abstract:The voice activity detection algorithm based on the periodic decomposition of voice was proposed.The traditional voice activity detection algorithms perform poorly in low signal to noise ratio environments of dynamic background noise,because the detective features energy and zero crossing rate,etc,are based on the stationary noise,and are sensitive to the change of signal to noise ratio in the traditional methods.The proposed method is able to solve this problem very well,because the periodicity of the voiced sound part in speech is a very important feature different from the noises and it varies weakly with the type and the signal to noise ratio of the background noise.The accuracy of the pitch extraction has a great influence on the final result of voice activity detection.In view of this situation,the fused pitch extraction method was also proposed,which combined autocorrelation,circular average magnitude difference and YIN.The method obtains better results than any of the three methods with the background noise being white noise,car noise and bubble noise at signal to noise ratios of 0 dB,5 dB and 10 dB in the accuracy of pitch extraction and voice activity detection.
Super-Low Frequency Electromagnetic Noise Processing System Based On Adaptive Filtering

Shanshan Zhao,Nan Wang,Li Chen,Jian Hui,Chengye Zhang,Qiming Qin

DOI: https://doi.org/10.1109/IGARSS.2015.7326880

2015-01-01

Abstract:Super Low Frequency electromagnetic prospecting methods, based on natural source, have seen an increasingly trend in geophysical applications. It is known that natural source electromagnetic signal is weak, and how to extract useful information has drew great attention wordwidely. In this paper, we designed a signal processing method, an adaptive filter, to filter out the strong power frequency interference at 50Hz and its harmonics mixed in the output signal from induction magnetic sensors. As the output could change with the input, the adaptive filter system is releated to its input signal closely and specificly. Because of its stronger adaptability and better filtering performance, the adaptive filter showed good effectiveness.
A method for characterizing after-pulsing and dark noise of PMTs and SiPMs

A. Butcher,L. Doria,J. Monroe,F. Retiere,B. Smith,J. Walding

DOI: https://doi.org/10.1016/j.nima.2017.08.035

2017-08-22

Abstract:Photo-multiplier tubes (PMTs) and silicon photo-multipliers (SiPMs) are detectors sensitive to single photons that are widely used for the detection of scintillation and Cerenkov light in subatomic physics and medical imaging. This paper presents a method for characterizing two of the main noise sources that PMTs and SiPMs share: dark noise and correlated noise (after-pulsing). The proposed method allows for a model-independent measurement of the after-pulsing timing distribution and dark noise rate.

Instrumentation and Detectors
A simple test for periodic signals in red noise

S. Vaughan

DOI: https://doi.org/10.1051/0004-6361:20041453

2005-02-01

Astronomy and Astrophysics

Abstract:We demonstrate a simple method for testing the significance of peaks in the periodogram of red noise data. The procedure was designed to test for spurious periodicities in X-ray light curves of active galaxies, but can be used quite generally to test for periodic components against a background noise spectrum assumed to have a power law shape. The method provides a simple and fast test of the significance of candidate periodic signals in short, well-sampled time series such as those obtained from XMM-Newton observations of Seyfert galaxies, without the need for Monte Carlo simulations. A full account is made of the number of trials and the uncertainties inherent to the model fitting. Ignoring these subtle effects can lead to substantially overestimated significances. These difficulties motivate us to demand high standards of detection (minimum per cent confidence) for periodicities in sources that normally show red noise spectra. The method also provides a simple means to estimate the power spectral index, which may be an interesting parameter itself, regardless of the presence/absence of periodicities.

astronomy & astrophysics
Electrostatic Signal Self-Adaptive Denoising Method Combined with CEEMDAN and Wavelet Threshold

Yan Liu,Hongfu Zuo,Zhenzhen Liu,Yu Fu,James Jiusi Jia,Jaspreet S. Dhupia

DOI: https://doi.org/10.3390/aerospace11060491

IF: 2.66

2024-06-20

Aerospace

Abstract:A novel low-pass filtering self-adaptive (LPFA) denoising method combining complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and a wavelet threshold (WT) strategy is proposed to solve the problem of the aero-engine gas-path electrostatic signal noise, which challenges the gas-path component condition monitoring and feature extraction techniques. Firstly, the integration of CEEMDAN addresses modal aliasing and intermittent signal challenges, while the proposed low-pass filtering method autonomously selects valuable signal components. Additionally, the application of the WT in the unselected components enhances the extraction of useful information, presenting a unique and advanced approach to electrostatic signal denoising. Moreover, the proposed method is applied to simulated signals with different input signal-to-noise ratios and experimental fault electrostatic signals of a micro-turbojet engine. The comparison with several traditional approaches in a denoising test for the simulated signals and experimental signals reveals that the proposed method performs better in extracting the effective components of the signal and eliminating noise.

engineering, aerospace

Extraction of Periodic Signals from A Noise Background

Signal processing for ultra-wideband life detection radar based on periodic sampling

Extracting hidden weak sinusoidal signal with short duration from noisy data: Analytical theory and computational realization

Weak Signal Detection Based on United Denoising and Frequency Modulation

Weak Signal Extraction in Noise Using Variable-Step Gaussian-Sinusiodal Filter

Study on weak sound signal separation and pattern recognition under strong background noise in marine engineering

Vital Sign Extraction in the Presence of Radar Mutual Interference.

Event Detection and Period Extraction Using Multi-Scale Symmetry and Entropy

Study on the Low-frequency Sound Detection

Nonparametric Extraction of Oscillations in Short Time Series

Regularized Periodic Gaussian Process for Nonparametric Sparse Feature Extraction from Noisy Periodic Signals

Multi-scale event detection and period extraction

Periodic Signal Recovery and Detection from 1-Bit Measurements Using Convolutional Neural Network

Subnoise detection of a fast random event

Extraction of Intrawave Signals Using the Sparse Time-Frequency Representation Method

Extracting Periodic Driving Signal from Chaotic Noise *

The Research on Pitch Extraction Method for Voice Activity Detection Based on Periodic Decomposition

Super-Low Frequency Electromagnetic Noise Processing System Based On Adaptive Filtering

A method for characterizing after-pulsing and dark noise of PMTs and SiPMs

A simple test for periodic signals in red noise

Electrostatic Signal Self-Adaptive Denoising Method Combined with CEEMDAN and Wavelet Threshold