Abstract:The C-band deflecting cavity designed last year is finished. In this paper, the RF measurement of the cavity is introduced. After tuning, it works well at 5.712GHz with a coupling factor degree around 1.05. And we measured the electromagnetic field with bead-pull method. The flatness of the magnetic field is around 0.9, which is not ideal but meet the requirements of the bunch length measurement. And we propose a method of tuning to make sure both frequency and field flatness. INTRODUCTION The C-band deflecting cavity designed last year for the measurement of ultra-short electron beams is finished. It’s a standing wave RF deflecting structure consisting of 3 cells. This cavity is designed to operate at a frequency of 5.712GHz. In the second section of the paper, the design of the deflector is briefly introduced. RF measurement results are shown in the third part. And a new tuning method is discussed in the fourth part. RF DEFLECTOR DESIGN In our case, we choose a 3-cell SW structure to meet the required transverse deflecting voltage Vdef=1MV. The working mode is TM110 mode and π-mode. The 3D-model draw by CST is shown in Figure 1. Figure 1: 3D-design of the deflector. The main part of the model is composed of several cylinders. The radii of the cells are determined by both the frequency and magnet field flatness. And the length of central cell is determined by the working mode while the length of the end cells is determined by the results of particle dynamics[1]. In order to make sure the polarization direction not changed while two cell coupled, two end cells are slotted on the edges which are perpendicular to the direction we put the coupler. According to the discussion above, the dimensions of the cavity are shown in figure 2 and table 2. Figure 2: 3D-design of the deflector. Table 1: Dimensions of the RF Cavity Dimensions Value(mm) rm 30.85 dm 21.49 re 30.61 de 10.93 t 4.76 rb 8 rslot (not shown in figure 2) 3.5 According to the dimensions, it’s easy to get the cavity parameters such as the transverse shunt impedance. And table 3 shows the main parameters of the RF cavity. With 1 MW input power, the deflecting voltage can be 1.19 MV. Table 3: Cavity Parameters Parameters Value Q0 9003 RT/Q(MΩ) 156 RT(MΩ) 1.42 P(MW) 1 Vdef(MV) 1.19 ___________________________________________ *Work supported by NSFC 11375098 and 11327902 #jxp14@mails.tsinghua.edu.cn MOPMR060 Proceedings of IPAC2016, Busan, Korea ISBN 978-3-95450-147-2 386 C op yr ig ht © 20 16 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s 06 Beam Instrumentation, Controls, Feedback and Operational Aspects T03 Beam Diagnostics and Instrumentation In table 3, we are more concerned about RT/Q which has little change after machining. And we can evaluate the real deflecting voltage by measuring the quality factor Q0 by equation 1

The Design of Magnetic Field Measurements System for CYCIAE-100

Field Mapping System Design for the Superconducting Cyclotron CYCIAE-230

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Low Field NMR System Based on High T_c DC-SQUID

In situ beam trajectory tilt measurement based on single cavity beam position monitor

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

Design and performance of the digital LLRF control system for isotope production cyclotron

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Train probe for beam diagnostics of the SC200 superconducting cyclotron

THE CONTROL SYSTEM DEDICATED FOR BEAM LINE OF PROTON RADIOGRAPHY TEST-STAND ON A 100 MeV CYCLOTRON CYCIAE-100 *

A New Alignment Method for HIMM Magnetic Field Measurement System

The construction of the inner ion source for SC200 compact superconducting cyclotron

A novel device for the measurement of the mechanical and magnetic axes of superconducting magnet assemblies for accelerators

THE STUDY ON RF CAVITY TOLERANCE FOR CYCIAE-100

Design of a large-scale superconducting dipole magnet for the CEE spectrometer

THE STUDY ON RF CAVITY TOLERANCE FOR CYCIAE-100*

Development of a Real-Time Magnetic Field Measurement System for Synchrotron Control

Preliminary Study On Measurement Of Magnetic Center Of Quadrupoles Using Quadrupole Shunt For Hefei Storage Ring

USING ONE-DIMENSIONAL HALL PROBE TO MEASURE THE SOLENOID MAGNET FOR CSNS/RCS

C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam