Abstract:A new approach was developed for the prediction of fatigue crack growth. Based upon the elastic-plastic stress analysis of a crack component and the application of a general multiaxial fatigue criterion, fatigue crack propagation was modeled by using the cyclic plasticity material properties and fatigue constants obtained for crack initiation. The cyclic elastic-plastic stress-strain field near the crack tip was analyzed using the finite element method with the implementation of a robust cyclic plasticity theory. A multiaxial fatigue criterion was employed to determine the fatigue damage. With an incremental form, the multiaxial fatigue criterion can be directly used for assessing fatigue damage near the crack tip. A straightforward method was developed to determine the fatigue crack growth rate. Crack propagation behavior of a material was obtained without any additional assumptions or fitting. Benchmark Mode I fatigue crack growth experiments were conducted using 1070 steel at room temperature. The approach was able to quantitatively capture all the important fatigue crack propagation behaviors including the overload and the R-ratio effects on crack propagation and threshold. The models provide a new perspective for the R-ratio effects. The success of the approach confirms that the fatigue crack initiation and propagation behaviors are governed by the same fatigue damage mechanisms. Crack growth can be treated as a process of continuous crack nucleation. In addition, the sensitivity of the predicted fatigue growth rate to the element size in the finite element model was discussed.

A new model of the fatigue crack growth threshold

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

Instrumented indentation measurements of residual stresses around a crack tip under single tensile overloads

On the Relations Between the Threshold Values of the Fatigue Crack Growth and the Cyclic Deformation Behavior of Materials

Cyclic Plasticity and Fatigue Crack Growth

Fatigue Crack Growth Based on the Dislocation-Free Zone (dfz) Model

A modification to the two driving forces model for fatigue threshold prediction

Removal of the Influence of Stress Triaxiality on Crack Tip Opening Displacement Fracture Toughness by Continuum Damage Mechanics Approach

Crack Tip Strain Evolution and Crack Closure During Overload of a Growing Fatigue Crack

Analysis of the Effect of K-Max on the Fatigue Crack Propagation Threshold

A unified prediction model for physically small crack and long crack growth based on modified CTOD

A New Approach to Predicting Fatigue Crack Propagation

Understanding Thermal–mechanical Fatigue Crack Growth: A Microscopic Mechanical Model

A modified model for calculating crack tip opening displacement (CTOD) considering fracture process zone (FPZ) in rock

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Interpreting Load Ratio Dependence of Near-Threshold Fatigue Crack Growth by a New Crack Closure Model

Near-tip Strain Evolution and Crack Closure of Growing Fatigue Crack under a Single Tensile Overload

Experimental study of crack tip deformation under fatigue load

Numerical simulation of 3D fatigue crack growth of CT specimens

STUDY OF FATIGUE CRACK GROWTH THRESHOLD BASED ON TEST RESULTS