Abstract:This work proposes a liquid-metal-based calorimetric micro-flow sensor within a polydimethylsiloxane (PDMS) chip. It can measure the flow rate of fluid in microscale channels, with a range as low as several microliters per minute. This in-chip sensor is proposed to solve the issue of detecting the flow rate in microfluidic systems. To make the sensor compatible with PDMS microfluidic chips, low-melting-point gallium-based alloy and bismuth-based (bi-based) alloy are used to make the micro heater and bi-metal thermocouples, for these alloys can be easily injected into a PDMS chip to form electrodes. To minimize heat resistance (or temperature difference) between fluid and the detecting ends of thermocouples, these ends are directly exposed to liquid in the flow channel with the help of a special reversible bonding technology. Thermocouples are connected in parallel to improve the sensor's response. A novel method to bond and electrically connect the sensor to a PCB (print circuit board) is also elaborated. Since the calorimetric flow sensor is sensitive to heating power, fluid temperature and environment cooling, a dimensionless parameter less independent of these factors is deduced from heat transfer theory, and this idea is used in result processing to offset the bad effect. Experiments with pure water show that this sensor can be used to detect flow rates, with a resolution up to 4 μl/min/mV and a range of 12 μl/min in this case, and that at different heating powers, the thermal potential results vary significantly whereas the dimensionless results nearly keep the same. Present work indicates that this sensor has the potential to be integrated into a PDMS microfluidic system and to provide accurate and stable results if a dimensionless method is used in data processing.

A Flexible Flow Sensor System And Its Characteristics For Fluid Mechanics Measurements

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

A Low-Cost Flexible Hot-Film Sensor System for Flow Sensing and its Application to Aircraft

A flexible integrated micromachined hot-film sensor array for measuring surface flow vector

A Low-Cost Integrated Micro System for Flow Velocity and Direction Measurement

Micro Thermal Flow Sensors/systems on Flexible PCB and Extensive Applications

Flexible Micro Flow Sensor for Micro Aerial Vehicles

Monolithic Integration of a Flexible Micro Thermal Flow Sensor

Design of Thermal Liquid Flow Microsensor

Highly Sensitive Flow Sensor Based on Flexible Dual-Layer Heating Structures

Fabrication and characterization of high-sensitivity, wide-range, and flexible MEMS thermal flow velocity sensors

Microfluidic Flowmeter Based on Micro "Hot-Wire" Sandwiched Fabry-Perot Interferometer.

Low-cost Portable Respiration Monitor Based on Micro Hot-Film Flow Sensor

A Compact Flexible Thermal Flow Sensor for Detecting Two-Dimensional Flow Vector

A robust flow sensor for high pressure automotive applications

A Flexible Hot-Film Sensor Array for Underwater Shear Stress and Transition Measurement

Hot-wire Sandwiched Fabry-Perot Interferometer for Microfluidic Flow Rate Sensing

Laser Direct Writing of Flexible Thermal Flow Sensors

A Thermo-Resistive Flow Sensor for Injection Rate Measurements

Flexible capacitive pressure sensor based on electrically assisted micro-nanoimprinting

A liquid-metal-based microscale calorimetric in-chip flow sensor for flow rate measuring