Abstract:With the transformation of the trend of vehicle electrification, the overall noise level in the vehicle is gradually reduced. The problem of low-frequency noise in the vehicle, which was previously ignored, is becoming more and more prominent. To solve the vehicle low-frequency noise problem, a combination of real-vehicle tests and simulation analysis is carried out. During the test, the driver and passengers feel that there is a relatively obvious low-frequency roar noise in the car, which results from the structural radiation noise of the trunk door vibration. Therefore, to solve this problem, we design an acoustic metamaterial with lightweight and miniaturized features based on the local resonance principle of phononic crystals. Firstly, the selection of the resonant unit configuration and the design of the band gap are implemented. Then, the layout planning of the whole vehicle, the layout of the resonance unit and the design of the base frame are implemented. The actual vehicle test results show that: after attaching the designed acoustic metamaterial, the low-frequency noise sound pressure levels in the front and rear of the vehicle were reduced by 2.0 dB (A) and 2.3 dB (A), respectively, meanwhile, the interior noise sound quality was improved. The sound pressure level at the driver's right ear in the car has an abnormal peak of around 35Hz. In addition, the driver and passengers feel that there is a relatively obvious low-frequency roar noise in the car, and through low-pass filtering of the collected signals, it is confirmed that the peak frequency is the main cause of the low-frequency roar in the car. The low-frequency steady-state noise of the car is generally considered to be the low-frequency vibration of the body panel and the radiation occurs. Through the finite element simulation analysis (Grid Participation Analysis) of the abnormal peak frequency, the results show that the low-frequency roar is caused by the low-frequency vibration of the tailgate sheet metal, and the problem peak frequency is not coupled with the acoustic cavity mode. Facing the problem of the low-frequency roar radiated into the car by the vibration of the tailgate sheet metal parts, based on the local resonance band gap theory, we developed a design to suppress the 35 Hz vibration of the tailgate sheet metal parts and meet the characteristics of lightweight and miniaturization. By attaching the acoustic metamaterial to the tailgate and performing CAE simulation of the whole vehicle, it is determined that the structure can indeed reduce the 35 Hz noise in the car and the peak value of the tailgate sheet metal vibration.

Topology optimization of car body based on acoustic sensitivity

Acoustic Topology Optimization of a Truck Cab Based on Coupled Panel Contribution Analysis

Low-noise structure optimization of a heavy commercial vehicle cab based on approximation model

Sound absorption structure optimization based on material absorption models and noise rating curves

Lightweight Research of Automobile Dash Panel Based on Sound-Structure Sensitivity

Coupled optimization of internal combustion engine radiated noise and interior noise

Acoustic optimisation design for suspension characteristics based on the method of dynamic subsystem modification

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Modeling of Acoustic Characteristics of a Cab with Response Surface Method and Its Application

Sound transmission loss optimization of clamped double-panels

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Research on optimization control of vehicle road noise performance

Topology optimization of damping material layout in coupled vibro-acoustic system using hybrid finite element-wave based method

Smooth Topological Design of Lightweight Vibro-Acoustic Sandwich Structures by Maximizing Sound Transmission Loss

Sound Insulation of Corrugated-Core Sandwich Panels: Modeling, Optimization and Experiment

Research on Low-Frequency Noise Control of Automobiles Based on Acoustic Metamaterial

Coupled Analysis of Engine Noise and Interior Noise of an Automobile

Sound Transmission Loss of an Automotive Floor Panel Section with Cross Members

Vibro-acoustic topology optimization for improving the acoustic insulation and mechanical stiffness performance of periodic sandwich structure

Study of NVH performance improvement for a four-cylinder diesel engine body

Vibration and noise reduction for a 490 diesel engine body