Abstract:A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

Mechanical Performance Tests of a Novel Three-dimensional Isolation Bearing

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Development of an innovative three-dimensional vibration isolation bearing

An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

Experimental and numerical studies of a novel three-dimensional isolation device incorporating disc springs with U-shaped dampers

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Experimental Investigation On A Novel 3-D Isolator Made Of Shape Memory Alloy Pseudo-Rubber

Seismic Performance of Building with Novel Steel Roller Isolation Bearing: Experimental and Numerical Studies

Seismic performance of a novel 3D isolation system on continuous bridges

Mechanical Properties and Seismic Loss Assessment of Improved Isolation Bearing with Variable Stiffness

Shaking table test of a novel Three-dimensional seismic isolation system with inclined rubber bearings

Shaking Table Tests on Seismic Simulation of Three-dimensional Isolated Continuous Girder Bridges

Coned Disc Spring Compound Vertical Isolation: Testing and Modelling

Tests, model, and applications for coned-disc-spring vertical isolation bearings

Seismic protection of a single-layer spherical lattice shell structure using a separated three-dimensional isolation system

Performance Analysis and Comparison of Two Base Isolation Systems with Super-Large Displacement Friction Pendulum Bearings

Mechanical Behavior of Stainless Steel Metallic Pseudo-Rubber for Three-Directional Isolation

In situ tests of building structures isolated by innovative three‐dimensional vibration isolation bearings

Mechanical Behavior of Laminated Rubber Isolation Bearing with Buckling Steel Plate

Development of Small-Sized Lead Inserted Laminated Rubber Bearing for Nuclear Component Seismic Isolation

Study on a conical bearing for acceleration-sensitive equipment