Abstract:The synthesis of light olefins via carbon monoxide hydrogenation is effective means to resolve the increasing shortage of petroleum resources. We have previously reported the Fe 3C ultrafine particle catalyst prepared by laser pyrolysis method, while its industrialization is difficulty owing to its expensive cost. This paper reports a series iron based catalysts supported on activated char (AC) that were prepared from different iron sources (ferric citrate, ferric oxalate and ferric nitrate), different activated char (activated cocoanut char GH101 and activated nut char GH81) and different promoters. Carbon monoxide hydrogenation reaction was performed over the Fe/AC catalysts. It was found that the Fe/AC catalysts exhibit rather higher activity and selectivity for light olefins. XRD characterization shows that the bulk phase of fresh Fe Cu K/AC catalyst consists of α Fe, Fe 3O 4 and Cu 0. After the reaction of Fischer Tropsch synthesis, the bulk phase structure of the catalyst converted to α Fe, Fe 5C 2, Fe 7C 3, Cu 0 and K 2O. The bulk phase structure of Fe Mn K/AC catalyst is mainly (Fe,Mn)O mixed crystal. The α Fe, Fe x C y and (Fe,Mn)O from our experiment are similar to the active phases of the Fe/C catalyst prepared by laser pyrolysis. The performance of catalyst was characterized, the result shows that the Fe/AC catalysts originally prepared with ferric oxalate as iron source, with GH101 as supporter, and with Cu, Mn, Si and K as promoters generally exhibit high activity. The influence of different potassium salts on the Fe/AC catalysts was investigated. The result indicates that under the conditions of SV=600 h -1 , p =1 5 MPa and θ =320 ℃, the Fe Mn K 2CO 3/AC catalyst is the most effective catalyst with CO conversion up to 97 4% and C = 2～C = 4 selectivity up to 68 0%.

Carbon Dispersed Iron-Manganese Catalyst for Light Olefin Synthesis from CO Hydrogenation

Carbon Modified Fe–Mn–K Catalyst for the Synthesis of Light Olefins from CO Hydrogenation

Effects of Pretreatment Conditions for Iron-Manganese Catalyst on Synthesis of Light Olefins Through CO Hydrogenation

Selective Hydrogenation of CO2 and CO to Useful Light Olefins over Octahedral Molecular Sieve Manganese Oxide Supported Iron Catalysts

Preparation and Characterization of Fe/AC Catalysts for Synthesis of Light Olefins via Carbon Monoxide Hydrogenation

Hydrogenation of CO2 to Valuable C2-C5 Hydrocarbons on Mn-Promoted High-Surface-Area Iron Catalysts

Direct Carbon Dioxide Hydrogenation to Long-Chain Α-Olefins over FeMnK Catalysts

Hydrocarbon Synthesis from CO2 and H2 Using the Ultrafine Iron-Containing Catalytic Systems Based on Carbonized Cellulose

Effect of Iron Content on Fe-Mn Catalysts for Syngas to Light Alkenes

The Construction of Iron-Based Catalysts Encapsulated by Graphite for CO2 Hydrogenation to Light Olefins

Preparation of Fe-Mn catalyst by hydrothermal method and its catalytic activity for the synthesis of light olefins from CO hydrogenation

Enhanced Effect of the Mesoporous Carbon on Iron Carbide Catalyst for Hydrogenation of Dimethyl Oxalate to Ethanol

Synthesis of light olefins from CO hydrogenation over Fe-Mn catalysts: Effect of carburization pretreatment

Highly Dispersed Fe/EG Catalysts Assisted by Ammonium Citrate and Their Application in CO2 Hydrogenation to Olefins

Manganese-Modified Fe3o4 Microsphere Catalyst with Effective Active Phase of Forming Light Olefins from Syngas

Cellulose modified iron catalysts for enhanced light olefins and linear C5+ α-olefins from CO hydrogenation

Tuning Direct CO Hydrogenation Reaction over Fe-Mn Bimetallic Catalysts Toward Light Olefins: Effects of Mn Promotion

The role of manganese in CoMnO x catalysts for selective long-chain hydrocarbon production via Fischer-Tropsch synthesis

Hydrothermally Stable MOFs for CO 2 Hydrogenation over Iron-Based Catalyst to Light Olefins

Fe-MOF-derived Highly Active Catalysts for Carbon Dioxide Hydrogenation to Valuable Hydrocarbons

Metal-organic framework-derived Fe3O4-FeCx catalyst for direct CO2 hydrogenation to light olefins