Abstract:Developing an adsorbent with high adsorption capacity and high selectivity is of great importance for the post-combustion CO2 capture. Inspired by the theoretical calculation findings that the introduction of alkali metal atoms (e.g., Li, Na, and K) into the carbon framework can significantly increase the CO2 adsorption capacity through the enhanced electrostatic interaction, herein, we have successfully developed a series of alkali metal doped carbons through a simple and effective strategy. The systematic characterization results prove that alkali metals are uniformly introduced into the carbon framework without changing the pore size distribution and amorphous structure of the original material, but slightly reducing the specific surface area. The adsorption performances from the static adsorption and the dynamic breakthrough experiments with a binary mixture of CO2/N2 (15/85, v/v) reveal that the doping of alkali metals can greatly enhance the capture and separation of CO2, in which the lithium-doped porous carbon presents the best CO2 uptake of 4.1 mmol/g at 25 °C (48.3% higher than that of undoped carbon) with the highest CO2/N2 selectivity of 47 and fastest adsorption rate. The high adsorption capacity and selectivity presented are comparable to the data reported in the previous literature. The density functional theory and grand canonical Monte Carlo molecular simulation results demonstrate that, compared with N2, alkali metal doped carbon has a stronger binding energy and higher adsorption density for CO2 and thus increases the CO2/N2 selectivity to a greater extent. This proof-of-concept work paves an alternative way for the development of high-performance CO2 adsorbents.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c02313.Computational methodology; XPS O 1s spectra of the as-prepared samples; TEM mapping images; nitrogen adsorption isotherms collected at 25 °C; breakthrough curve for humid mixtures; DFT binding energy calculations; Freundich model fitted CO2 adsorption isotherms (PDF)This article has not yet been cited by other publications.

NaKA Sorbents with High CO(2)-over-N(2) Selectivity and High Capacity to Adsorb CO(2).

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Combined CO2-philicity and Ordered Mesoporosity for Highly Selective CO2 Capture at High Temperatures

K+ exchanged zeolite ZK-4 as a highly selective sorbent for CO2

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

CO2-Induced Displacement of Na+ and K+ in Zeolite |Nak|-a

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Superior Capture of CO2 Achieved by Introducing Extra-framework Cations into N-doped Microporous Carbon

Adjusting the Proportions of Extra-Framework K+ and Cs+ Cations to Construct a "molecular Gate" on ZK-5 for CO2 Removal

NaA Zeolite/carbon Nanocomposite Thin Films with High Permeance for CO2/N2 Separation

A Novel Aerogel Sodium‐based Sorbent for Low Temperature CO2 Capture

Synthesis of NaY Zeolite and their CO<sub>2</sub> Adsorption Properties

Study of the Novel Kmgal Sorbents for Co2 Capture

Specific K+ Binding Sites As CO2 Traps in a Porous MOF for Enhanced CO2 Selective Sorption

Removal of Low Concentration Co2 at Ambient Temperature Using Several Potassium-Based Sorbents

Carbonation characteristics of dry sodium-based sorbents for CO 2 capture

Synthesis of Alkali Metals Functionalized Porous Carbon for Enhanced Selective Adsorption of Carbon Dioxide: A Theoretically Guided Study

Sol-gel Derived, Na/K-doped Li4SiO4-based CO2 Sorbents with Fast Kinetics at High Temperature

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

LiNaCO3‐Containing Porous Carbon Composites for CO2 capture