Abstract:A series of sodium alginate (SA) nanocomposite films with different loading levels of graphitic-like carbon nitride (g-C3N4) were fabricated via the casting technique. The structure and morphology of nanocomposite films were investigated by X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Thermogravimetric analysis results suggested that thermal stability of all the nanocomposite films was enhanced significantly, including initial thermal degradation temperature increased by 29.1 °C and half thermal degradation temperature improved by 118.2 °C. Mechanical properties characterized by tensile testing and dynamic mechanical analysis measurements were also reinforced remarkably. With addition of 6.0 wt % g-C3N4, the tensile strength of SA nanocomposite films was dramatically enhanced by 103%, while the Young's modulus remarkably increased from 60 to 3540 MPa. Moreover, the storage modulus significantly improved by 34.5% was observed at loadings as low as 2.0 wt %. These enhancements were further investigated by means of differential scanning calorimetry and real time Fourier transform infrared spectra. A new perspective of balance was proposed to explain the improvement of those properties for the first time. At lower than 1.0 wt % loading, most of the g-C3N4 nanosheets were discrete in the SA matrix, resulting in improved thermal stability and mechanical properties; above 1.0 wt % and below 6.0 wt % content, the aggregation was present in SA host coupled with insufficient hydrogen bondings limiting the barrier for heat and leading to the earlier degradation and poor dispersion; at 6.0 wt % addition, the favorable balance was established with enhanced thermal and mechanical performances. However, the balance point of 2.0 wt % from dynamic mechanical analysis was due to combination of temperature and agglomeration. The work may contribute to a potential research approach for other nanocomposites.

Effect of NaCI on the Rheological Behaviors of Sodium Alginate Multi-walled Carbon Nanotubes Solutions

Rheological behavior of blend spinning solution of sodium alginate and carbon black

Effects of Inclusion Size on Thermal Conductivity and Rheological Behavior of Ethylene Glycol-Based Suspensions Containing Silver Nanowires with Various Specific Surface Areas

Effects of Oilfield Injection Water Component on Rheological Characteristics of CTAC/NaSal Aqueous Solution

Rheological Behaviors of Carbonaceous Materials Suspended in Sodium Alginate Solutions

Effect of intermolecular interaction on electrospinning of sodium alginate

Effect of NaCl concentration on the dispersion, stability and rheological properties of MWNTs by CMC

Effect of Electrolyte on the Rheological Behaviors of Sodium Alginate Solutions

Effects of Temperature Change on the Rheological Property of Modified Multiwall Carbon Nanotubes

Effect of Alkyl Trimethylammonium Bromide on Rheology of Entangled Semi-dilute Solution of Sodium Carboxymethylcellulose

Influence of g-C3N4 nanosheets on thermal stability and mechanical properties of biopolymer electrolyte nanocomposite films: a novel investigation

Enhancing Electrospinnability of Chitosan Membranes in Low-Humidity Environments by Sodium Chloride Addition

Effects of Surfactants on Spinning Carbon Nanotube Fibers by an Electrophoretic Method.

Effect of Multi-Walled Carbon Nanotubes on the Morphology Evolution, Conductivity and Rheological Behaviors of Poly(methyl Methacrylate)/poly(styrene-Co-acrylonitrile) Blends During Isothermal Annealing

Fabrication and Characterization of Alginate Fibers by Wet-Spinning

Dissolution mechanism of sodium alginate and properties of its regenerated fiber under low temperature

Dual roles of sodium polyacrylate in alginate fiber wet-spinning: Modify the solution rheology and strengthen the fiber

Effect of Thermal Oxidation of Carbon Nanotubes during Wet Spinning into Fibers Using Sodium Cholate Surfactant in Aqueous Dispersion

Effects of Molecular Weight and Guluronic Acid/Mannuronic Acid Ratio on the Rheological Behavior and Stabilizing Property of Sodium Alginate

Effect of SiO2, PVA and glycerol concentrations on chemical and mechanical properties of alginate-based films

Steady and Dynamic Rheological Behaviors of Sodium Carboxymethyl Cellulose Entangled Semi-Dilute Solution with Opposite Charged Surfactant Dodecyl-Trimethylammonium Bromide.