Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Deformation Behavior of Zr-Based Metallic Glass and Microforming of Microgears

Microforming Behavior of Zr-based Bulk Metallic Glass

Microforming Processing of the Zr-Based Metallic Glass

Finite element simulation and experimental investigation of forming micro-gear with Zr–Cu–Ni–Al bulk metallic glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region

Finite Element Analysis on the Micro-Forming Process of Zr-based Bulk Metallic Glass

Superplastic Micro-Forming of Zr65Cu17.5Ni10Al7.5 Bulk Metallic Glass with Silicon Mold Using Hot Embossing Technology

Super-plastic forming process of Zr-based bulk metallic glass

Study on Micro-forming Process of Zr-based Bulk Metallic Glass with Silicon Mold

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Superplastic Formability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass

Prevalence of Shear Banding in Compression of Zr41Ti14Cu12.5Ni10Be22.5 Pillars As Small As 150 Nm in Diameter

Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region

Mechanism for Microstructural Evolution Induced by High Temperature Deformation in Zr-based Bulk Metallic Glasses

Homogeneous flow and superplastic forming process of Ti-Zr-Cu-Pd-Sn bulk metallic glass in supercooled liquid region

Oxidation Behavior In Super-Plastic Microforming Of Zr65cu17.5ni10al7.5 Bulk Metallic Glass

The structural evolution and mechanical properties of a Zr-based bulk metallic glass during superplastic gas pressure forming

Temperature and Strain Rate Dependence of Deformation Behavior of Zr65Al7.5Ni10Cu17.5

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability