Abstract:Dynamic mechanical relaxation processes of amorphous alloys are very important to understand plastic deformation, glass transition phenomenon, diffusion behavior and crystallization. How to establish the correlation between mechanical properties and mechanical relaxation modes is one of key issues. In the current research, with the help of dynamic mechanical analysis (DMA), dynamic mechanical behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ bulk metallic glass from room temperature to supercooled liquid region was probed. In parallel, based on the uniaxial tensile tests, high-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass around glass transition temperature were investigated. Dynamic mechanical behavior and high temperature deformation behavior were discussed in the framework of quasi-point defects theory. The results demonstrated that main $\alpha $ relaxation process of metallic glass can be well described by the quasi-point defects theory. Based on internal friction of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass, activation energy of elementary movement of atoms $U_\beta$ is 0.63 eV. In addition, correlation factor $\chi $ corresponding to concentration of the quasi-point defects in solid glass remains almost constant below the glass transition temperature. When the temperature above the glass transition temperature, the correlation factor $\chi $ increases by increasing the temperature (below the crystallization temperature). Finally, high temperature flow behavior in tensile mode near the glass transition temperature of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was studied. The normalized viscosity decreases with increasing strain rate at low temperatures or high strain rates, indicating a non-Newtonian flow behavior. Whereas Newtonian flow behavior is observed at higher temperatures and lower strain rates. The apparent viscosity is affected by temperature and strain rate. High-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was described by stretched exponential function and free volume theory. Specifically, experimental master curve of the high temperature flow behavior of metallic glass is in good agreement with the prediction of the quasi-point defects theory, which provides a new insight on understanding of viscous effects during high temperature deformation of solid glasses.

Homogeneous flow and superplastic forming process of Ti-Zr-Cu-Pd-Sn bulk metallic glass in supercooled liquid region

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region

DYNAMIC RELAXATION CHARACTERISTICS AND HIGH TEMPERATURE FLOW BEHAVIOR OF ZR-BASED BULK METALLIC GLASS

Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Mechanical properties of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 high-entropy bulk metallic glass

Homogeneous Deformation of Ti41.5Cu37.5Ni7.5Zr2.5Hf5Sn5Si1 Bulk Metallic Glass in the Supercooled Liquid Region

Superplastic Formability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass

The High-Temperature Deformation Behavior of Pd20pt20cu20ni20p20 Metallic Glass

Plastic deformability and precipitation of nanocrystallites during compression for a Cu–Zr–Ti–Sn bulk metallic glass

Formation of Ti–Zr–Cu–Ni–Sn–Si Bulk Metallic Glasses with Good Plasticity

Formation, Bio-corrosion Behavior and Mechanical Properties of Ti-Zr-Cu-Co-Sn-Si Bulk Metallic Glasses

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Superductile Bulk Metallic Glass

High Temperature Deformation Behaviors of Ti40Zr25Ni3Cu12Be20 Bulk Metallic Glass

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Composition design of plastic Cu–Zr–Ti–Ni bulk metallic glass: A liquidus perspective

Structural Origins for the High Plasticity of a Zr–Cu–Ni–Al Bulk Metallic Glass

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy

Enhanced Formability of a Zr-based Bulk Metallic Glass in a Supercooled Liquid State by Vibrational Loading