Abstract:Accurately determining the natural frequency of coal-containing geological structures is crucial for preventing mine dynamic disasters and utilizing vibration waves to break coal and enhance its permeability. Based on the modal theory of rock, vibration models of coal-containing geological structures, including layering and fractures are established. By analysis, the undamped vibration equation and its characteristic equation for both the layered coal system and the fractured coal system are derived. Subsequently, the Lanczos method is employed to solve the system's vibration modes using ABAQUS. The effects of the layering position, layering thickness, layering physical properties, crack width, and crack length on the natural frequency and vibration response of coal-containing geological structures are investigated. The results indicate that when a single influencing factor is altered, the displacement response distribution of the coal body vibration system with geological structures remains essentially the same, and these single influencing factors have a minimal impact on the vibration displacement of the coal-containing geological structure. The natural frequency of the system decreases exponentially as the distance between the layering and the geometric center of the coal system with geological structures increases. The presence of layering in the coal system with geological structures significantly reduces the system's natural frequency. The natural frequency of the coal system with geological structures increases in a power function manner as the layering elastic modulus increases. Conversely, the natural frequency decreases with an increase in crack length. When the change ranges of crack width and bedding thickness are the same, the natural frequency of the fractured coal body system exhibits more significant changes. The natural frequency of the coal system with geological structures initially decreases and then increases as bedding thickness and crack width increase. The trend in the natural frequency changes and the position of the extreme point are related to the ratio of the elastic modulus and density of the geological structure.

Study in Natural Frequency and Vibration Model of Coke Drum Structure

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Damage Determination of Pipelines Based on Variation of Vibrating Frequencies

A model for determination of amount of coke deposit on catalyst based on vibration signal analysis

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Stick-slip vibration analysis and vibration frequency extraction of coke pushing system

Numerical Simulation Study on Vibration Characteristics and Influencing Factors of Coal Containing Geological Structure

Drum Strength Analysis of the Coke for 70kg Simulated Coke Oven

Structural Vibration Analysis of Historical Drum Tower Structure Caused by Underground Train Running

Modeling and Analysis of the In-Plane Vibration of a Complex Cable-Stayed Bridge

Wind-Induced Vibration of Traditional Chinese Citygate Buildings in the Ming-Qing Dynasties – A Case Study of the Nanjing Drum Tower

Vibration Analysis and FEM model of Hollow Circular Beam with Constrained Damping Layer

Further Investigation Into the Damage Tolerance of Different Coke Drum Support Skirt Designs

Analytical and Experimental Study of Free Vibration of Beams Carrying Multiple Masses and Springs

Effect of rigidity of tower on free vibration of cable-stayed bridge

Flap-wise Vibrations of Non-Uniform Rotating Cantilever Beams: an Investigation with Operational Experiments

Research on vibration damping model of flat-head tower crane system based on particle damping vibration absorber

Natural Vibration of a Beam with a Breathing Oblique Crack

Numerical Analysis of Vibration Under Partial Admission of Steam Turbine

The Simplified Analytical Method for Computing Dynamic Characteristics of Transmission Steel Towers

Analysis of Natural Vibration Characteristics of Modified Timoshenko Cracked Beam