Abstract:The polymorphic crystalline structure and melting behavior of biodegradable poly(butylene adipate) (PBA) samples melt-crystallized at different crystallization temperatures were studied by differential scanning calorimetry (DSC) and fourier transform infrared (FTIR) spectroscopy. The crystalline structure and melting behavior of PBA were found to be greatly dependent on the crystallization temperature. By comparison of the FTIR spectra and the corresponding second derivatives between the alpha- and beta-crystal of PBA, the spectral differences were identified for the IR bands appeared at 1485, 1271, 1183, and 930 cm(-1) and the possible reasons were presented. Especially, the 930 cm(-1) band was found to be a characteristic band for the beta-crystal. Combining the DSC data with the analysis of normalized intensity changes of several main IR bands during the melting process, the melting behaviors of the alpha- and beta-crystal were clarified in detail. It is demonstrated by the in situ IR measurement that the beta-crystalline phase would transform into the alpha-crystalline phase during the melting process, and the solid-solid phase transition from the beta- to alpha-crystal was well elucidated by comparing the intensity changes of the 1170 and 930 cm-1 bands. The dependence of the beta- to alpha-crystal phase transition on the heating rate was revealed by monitoring the intensity ratio of the 909 and 930 cm-1 band. It was suggested that at the heating rate of 0.5 or 1 degrees C/min, the percent amount of the transformed alpha-crystal from the beta-crystal was much higher than that at the higher heating rate. The beta-crystal transforms into the alpha-crystal incompletely at the higher heating rate because of the less time available for the phase transition. In addition, the beta- to alpha-crystal phase transition was further confirmed by the IR band shifts during the melting process. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1997-2007, 2009

Variations of the Glass‐transition Temperature in the Imidization of Poly(styrene‐co‐maleic Anhydride)

Kinetic Analysis of the Imidization of Poly(styrene‐co‐maleic Anhydride) with Aniline in the Melt

Kinetics and Simulation of the Imidization of Poly(styrene‐co‐maleic Anhydride) with Amines

Characteristic analysis on a reactive extrusion process for the imidization of poly(styrene-co-maleic anhydride) with aniline

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Temperature‐dependent Polymorphic Crystalline Structure and Melting Behavior of Poly(butylene Adipate) Investigated by Time‐resolved FTIR Spectroscopy

A Monte Carlo Study Of The Glass Transition Of Polymethylene

A novel styrene/maleic anhydride copolymer for polymer modification by SC CO2

Studies on the Glass Transition Temperature of Vinyls/N-Substituted Maleimides Copolymers

Fluorescent Polymer Made from Chemical Modification of Poly(Styrene-Co-Maleic Anhydride)

The Glass Transition Temperature of Poly(Phenylene Sulfide) with Various Crystallinities

Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with N -pentafluorophenyl maleimide; zero-orientational and photoelastic birefringence polymers with high glass transition temperatures

Copolymers of methyl methacrylate with N‐trifluorophenyl maleimides: High glass transition temperature and low birefringence polymers

A novel copolymer of methyl methacrylate with N-pentafluorophenyl maleimide: High glass transition temperature and highly transparent polymer

Preparation Of Poly(Styrene-Co-Isobornyl Methacrylate) Beads Having Controlled Glass Transition Temperature By Suspension Polymerization

Synthesis and Characterization of Trifluoromethyl Substituted Styrene Polymers and Copolymers with Methacrylates: Effects of Trifluoromethyl Substituent on Styrene

Nonlinear Phase‐separation Behavior of Poly(methyl Methacrylate)/poly(styrene‐co‐maleic Anhydride) Blends

Investigation by molecular dynamics simulation of the glass transition temperature and elastic properties of amorphous polymers PMMA, PMAAM and PMMA co PMAAM copolymers

Effects of molecular weight and interaction parameter on the glass transition temperature of polystyrene mixtures and its blends with polystyrene/poly (2,6-dimethyl-p-phenylene oxide)

Effects of Molecular Entanglement on Molecular Dynamics and Phase-Separation Kinetics of Poly(Methyl Methacrylate)/Poly(Styrene-Co-Maleic Anhydride) Blends