Abstract:Mn-based oxides are regarded as one of the most promising catalysts for selective catalytic reduction (SCR) of NOx by NH3 at low temperatures, but their applications are extremely restricted by the irreversible poisoning of SO2. Improving the SO2 tolerance of Mn-based catalyst has longtime received the most attentions from both academia and industry. In this work, a series of Cu-modified Mn3O4 spinels were synthesized, and the roles of the Cu dopant were investigated. The (Cu1.0Mn2.0)(1-delta)O-4 spinel showed both excellent SCR performance and SO2 resistance at low temperature. Cu doping improved the BET surface area, the quantities of active Mn4+ and the acid sites of Mn3O4 spinels, all of which contributed to the increase in low-temperature SCR activity. The formation of MnSO4 was mainly responsible for the irreversible deactivation of the Mn3O4 spinel upon exposure to SO2. DFT calculations suggested that SO2 was more likely to be adsorbed as "-Mn-O-S-O-Mn-" on Mn3O4 and (Cu1.0Mn2.0)(1-delta)O-4 spinels. Therefore, the formation of MnSO4 on the (Cu1.0Mn2.0)(1-delta)O-4 spinel was significantly mitigated by Cu doping, mainly due to reduced amounts of adjacent Mn. Moreover, resulting from the electronic transfer between copper and manganese cations within the spinel lattice (Cu2+ + Mn3+ reversible arrow Mn4+ + Cu+), the (Cu1.0Mn2.0)(1-delta)O-4 spinel retained a high surface ratio of Mn-4(+)/Mn-total, which maintained an excellent low-temperature SCR activity under the SO2-containing condition. This work shows that doping with the low-valence dopant of Cu can significantly improve the low-temperature SCR activity and SO2 tolerance of the Mn3O4 spinel, which could be a strategy for the further design of Mn-based SCR catalysts.

Waste-free Soft Reactive Grinding Synthesis of High-Surface-Area Copper–Manganese Spinel Oxide Catalysts Highly Effective for Methanol Steam Reforming

Template-free Synthesis of Stable Cobalt Manganese Spinel Hollow Nanostructured Catalysts for Highly Water-Resistant CO Oxidation

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

Cu1−xMgxAl3 spinel solid solution as a sustained release catalyst: One-pot green synthesis and catalytic performance in methanol steam reforming

Novel spinel oxide catalysts CuFexAl2−xO4 with high H2 selectivity with low CO generation in methanol steam reforming

Defect Engineering on CuMn2O4 Spinel Surface: A New Path to High-Performance Oxidation Catalysts.

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Sustained release catalysis: dynamic copper releasing from stoichiometric spinel CuAl2O4 during methanol steam reforming

Highly Efficient Copper-Manganese Oxide Catalysts with Abundant Surface Vacancies for Low-Temperature Water-Gas Shift Reaction

ZnFexAl2-xO4 spinel supported PdZnβ bifunctional catalyst for methanol steam reforming

Spinel-type MnxCr3-xO4-based catalysts for ethanol steam reforming

Electrochemical Synthesized Copper Mesh Catalysts for Methanol Steam Reforming

Defect Engineering on CuMn 2 O 4 Spinel Surface: A New Path to High-Performance Oxidation Catalysts

Cu–Mn–O nano-particle/nano-sheet spinel-type materials as catalysts in methanol steam reforming (MSR) and preferential oxidation (PROX) reaction for purified hydrogen production

The Role of the Cu Dopant on a Mn3O4 Spinel SCR Catalyst: Improvement of Low-Temperature Activity and Sulfur Resistance

Controllable Preparation of MnCo2O4 Spinel and Catalytic Persulfate Activation in Organic Wastewater Treatment: Experimental and Immobilized Evaluation

Electroplating sludge-derived metal and sulfur co-doping catalyst and its application in methanol production by CO2 catalytic hydrogenation

A composite having a porous substrate and polyhedral Cu-Fe oxide nanoparticles showing high catalytic activity during the steam reforming of methanol at low temperatures

Spinel-Derived Formation and Amorphization of Bimetallic Oxyhydroxides for Efficient Electrocatalytic Biomass Oxidation

A green approach for preparation of MnFeTi Low-temperature NH3-SCR catalysts: utilizing spent V2O5–WO3/TiO2 Catalysts

Enhanced catalytic stability of non-stoichiometric Cu–Al spinel catalysts for dimethyl ether synthesis from syngas: Effect of coordination structure