Abstract:The treatment effect of the combination process (pre-ozonation→high-density clarifier→sand filter→post ozonation→biological activated carbon(BAC) filter) was much better than that of the conventional process in treating the Huangpu River water, which is especially suit to high organic material and NH4 +-N in water. The removal efficiencies of CODMn and NH4 +-N by the post ozonation-BAC process were up to 30.4% and 18.9% respectively. And as the pre-ozonation process played a better role than pre-chlorination process in aid-coagulation, the removal efficiencies of CODMn and NH4 +-N were up to 29.6% and 81% respectively in traditional part of combination process. However, the removal efficiencies of CODMn and NH4 +-N were only 22.3% and 61.5% in the conventional process. In addition, the concentrations of algae toxins, trihalomethanes, bromate, molecular weight distribution and the related parameters of the BAC effluent were also investigated. The results show that the organic material with low molecular weight can be more easily removed by the post ozonationBAC processes (removal efficiency of organic material with molecular weight less than 1 kD is more than 70%). Tihalomethanes formation potential is 41% less than that of the conventional process. Besides, the microcystin and bromate concentrations are lower than drinking water standards in China. Moreover, the free chlorine disinfection can be used because the NH4 +-N can be mostly removed by the combination process, which can avoid the generation of nitrosamine as well as the odor and test problem by chloramine disinfection. However, the combination process also has some disadvantages such as the growth of algae on the purification structures during high-temperature season as the reaction time of ozone is relatively short. This problem may be solved by the combinated pre-ozonation and pre-chlorination process.

Performance on Organic Pollution Removal of O<sub>3</sub>-IBAC in Advanced Drinking Water Treatment

Comparison of O3 - BAC Combination and Conventional Processes on Removal of Pollutants for Treating Drinking Water

Unraveling Dissolved Organic Matter in Drinking Water Through Integrated Ozonation/ceramic Membrane and Biological Activated Carbon Process Using FT-ICR MS.

O_3/IBAC Process for Advanced Treatment of Drinking Water

Removal Of Organic Pollutants From Micro-Polluted Source Water By O-3-Bac Process

Application of Technology of O3-IBAC in High Quality Drinking Water

Comparison of O3-BAC and GAC for Removing Micropollutants from Drinking Water

Ac/O-3-Bac Processes for Removing Refractory and Hazardous Pollutants in Raw Water

Fate of Organic Pollutants in a Full-Scale Drinking Water Treatment Plant Using O3-BAC

Advanced Purification of Filtered Water by Aerobic IBAC

ADVANCED TREATMENT TECHNOLOGIES OF PAPER MILL WASTEWATER BY OZONE-BIOLOGICAL AERATED FILTER PROCESS

Treatment of slightly polluted water by using the technique of ozone-biological activated carbon fiber

Performance of an Integrated Treatment System for Clean Drinking Water Production

Study on O3-BAC process for removing micropollutants from drinking water

Characteristics of Organic Matter Removal of Micro-Polluted Raw Water from Yangtze River with Ozone-Biological Activated Carbon (O3 BAC) Treatment Processes

Comparison Of Ac/O-3-Bac And O-3-Bac Processes For Removing Organic Pollutants In Secondary Effluent

Study On The Removal Of Odor Causing Compounds From Water By O(3)-Bac

Efficient removal of organic matters and typical odor substances in rural drinking water using Ozone-BAC-UF combined system to meet new water quality standards in China

Removal of Disinfection Byproducts Precursors by Ozone-Biological Activated Carbon Process

Study on the Removal of Toxic Substance from River Water Using O 3 -GAC Process

[Ozone-Biological Activated Carbon for Advanced Removal of Typical Persistent Organic Pollutants from Micro-Polluted Source Water in the Yangtze Delta Region].