Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

Software and Hardware Design for the Temperature Control System of Quantitative Polymerase Chain Reaction

Research on temperature measuring positions selection and verification for Polymerase Chain Reaction instruments.

Adaptive Fuzzy Pid Control For Polymerase Chain Reactions

Simulation and experimental study of temprature lag time for Polymerase Chain Reaction instrument

FEA simulation research of temperature uniformity in quantitive PCR thermal cycle system

Research on thermal cycle system for real-time PCR instrument based on equivalent circuit model

Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument

High Precision Temperature Control for Plastic Film Based on a Combined Method

Design of Integrated Control System for Microfluidic PCR Analysis Instrument

Open Thermal Control System for Stable Polymerase Chain Reaction on a Digital Microfluidic Chip

A Temperature Control System for Polymerase Chain Reaction Machine for Cell-Systematic Evolution of Ligands by Exponential Enrichment-Based Automated Screening of Nucleic Acid Aptamers

Temperature Control Algorithm for Polymerase Chain Reaction (PCR) Instrumentation Based Upon Improved Hybrid Fuzzy Proportional Integral Derivative (PID) Control

Temperature control technology for PCR

A Piecewise Fuzzy Proportional Integral Derivative Control for Polymerase Chain Reaction Thermal Cycling

Research Progress of PCR Temperature Control Technology

Labview-based Microfluidic PCR PID Temperature Control System

Study on Large Area Temperature Control System for a Low-cost PCR Chip

Temperature-controlled System of PCR Chips

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument

Review of temperature control technology of PCR microfluidic devices

Temperature Control for PCR Thermocyclers Based on Peltier-Effect Thermoelectric