Abstract:TiB2 particulate reinforced aluminum matrix composites (TiB2/Al-MMCs) have received extensive attention due to a great potential in a wide variety of applications. Nano-TiB2/Al-MMCs have also received attention from scholars with the development of nanotechnology in recent years. However, obstacles like agglomeration of nanoparticles in the matrix, and the difficulty of preparation of nanoparticulate reinforced metal matrix composites (PRMMNCs) still need to be resolved. This study summarizes the research progress of Al-matrix composites (Al-MMCs) in recent years and exemplifies the common preparation methods. Experiments were designed to study the common problems in the preparation of composite materials. Two experiments were designed and completed in this study. First, TiB2/Al-4.5Cu composites were synthesized through a mixed salt reaction method. The distribution of reinforcing particle in the aluminum matrix was observed. The predictive model of particle behavior in Al-4.5wt. %Cu matrix based on thermodynamic laws was re-examined. The experiment results are inconsistent with the prediction from a classic prediction model. Regardless of the rate of solidification and critical velocity (VC), the most of the particles are rejected by advancing solid-liquid interface. Through review of classic particle pushing theory, this study attempts to derive a new boundary condition used to predict the behavior of reinforcing particles in a metal matrix during solidification based on the diffusion convection equations. Second, nano-TiB2/Al composites with a variety of volume fractions were synthesized by ultrasound assistance in a stirring method. The research has focused on optimization and improvement of preparation methods. High-energy ball milling (HEBM) and high-intensity ultrasound (HIU) were introduced into the fabrication process. Furthermore, a forging post-treatment process is used to process as-cast samples prepared by the experiment, so that the reinforcing particles in the composite material can be redistributed. The experiment results show that HEBM facilitates the mixing of nano-TiB2 particles with salts. HIU helps distribute particles evenly throughout the matrix. The Vickers hardness and tensile strength of the composites were tested. The results indicated that the forging treatment has great influence on the mechanical properties of composite materials.

Research Development of TiB_2 Particle Reinforced Al Matrix Composites

PREPARATION AND PROPERTIES OF TiB2/TiAl COMPOSITE SHEETS WITH LAYERED STRUCTURE

Research Progress of Particulates Reinforced TiAl Based Composites

Research Progress in Microstructure and Properties of TiB2/Al Composites

Effects of TiB2 Particles on Microstructure and Mechanical Properties of an In-Situ TiB2-Al–Cu–Li Matrix Composite

Research Progress in Manufacturing Process of TiB2/Al Composites

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Mechanical Properties and Fracture Morphology of In-situ TiB2 Particle Reinforced Aluminum Matrix Composites

Design and Thermodynamics of In-Situ TiB2 Reinforced B4 C Matrix Composites

Investigation on Fracture Toughness of Aluminum Matrix Composites Reinforced with in Situ Titanium Diboride Particles

Microstructure and mechanical properties of particulate reinforced matrix composite

Microstructure evolution during preparation of in-situ TiB reinforced titanium matrix composites

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB<sub>2</sub>/Al-Cu-Mn Composites

Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced With In-Situ TiB2 Particles

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Study on Microstructure of the TiB 2 Reinforced NiAlFe Metal Matrix Composites

Microstructure And Properties Of Tib2p/Al Composites Fabricated By Squeeze Casting Technology

Investigation on Microstructures and Mechanical Behavior of In-Situ Synthesized TiC and TiB Reinforced Ti6Al4V Based Composite

Effect of TiB2 on Microstructure, Mechanical Properties and Oxidation Resistance of TiAl-based Alloys