Abstract:TiB2 particulate reinforced aluminum matrix composites (TiB2/Al-MMCs) have received extensive attention due to a great potential in a wide variety of applications. Nano-TiB2/Al-MMCs have also received attention from scholars with the development of nanotechnology in recent years. However, obstacles like agglomeration of nanoparticles in the matrix, and the difficulty of preparation of nanoparticulate reinforced metal matrix composites (PRMMNCs) still need to be resolved. This study summarizes the research progress of Al-matrix composites (Al-MMCs) in recent years and exemplifies the common preparation methods. Experiments were designed to study the common problems in the preparation of composite materials. Two experiments were designed and completed in this study. First, TiB2/Al-4.5Cu composites were synthesized through a mixed salt reaction method. The distribution of reinforcing particle in the aluminum matrix was observed. The predictive model of particle behavior in Al-4.5wt. %Cu matrix based on thermodynamic laws was re-examined. The experiment results are inconsistent with the prediction from a classic prediction model. Regardless of the rate of solidification and critical velocity (VC), the most of the particles are rejected by advancing solid-liquid interface. Through review of classic particle pushing theory, this study attempts to derive a new boundary condition used to predict the behavior of reinforcing particles in a metal matrix during solidification based on the diffusion convection equations. Second, nano-TiB2/Al composites with a variety of volume fractions were synthesized by ultrasound assistance in a stirring method. The research has focused on optimization and improvement of preparation methods. High-energy ball milling (HEBM) and high-intensity ultrasound (HIU) were introduced into the fabrication process. Furthermore, a forging post-treatment process is used to process as-cast samples prepared by the experiment, so that the reinforcing particles in the composite material can be redistributed. The experiment results show that HEBM facilitates the mixing of nano-TiB2 particles with salts. HIU helps distribute particles evenly throughout the matrix. The Vickers hardness and tensile strength of the composites were tested. The results indicated that the forging treatment has great influence on the mechanical properties of composite materials.

Research Progress in Manufacturing Process of TiB2/Al Composites

Research Progress in Microstructure and Properties of TiB2/Al Composites

Research Progress of Particulates Reinforced TiAl Based Composites

STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES

Recent research progress in TiAl matrix composites: a review

Research Development of TiB_2 Particle Reinforced Al Matrix Composites

Recent Progress on the Fabrication of TiAl-Based Composites Sheet by Reaction Annealing of Elemental Foils

Selective laser melting of TiB2/AlSi10Mg composite: Processability, microstructure and fracture behavior

A Novel Fabrication Technology of in Situ TiB2/6063Al Composites: High Energy Ball Milling and Melt in Situ Reaction

Reaction synthesis, microstructure, and mechanical properties of in-situ TiAl-based multiphase composites

Processing of in situ aluminum-matrix composites and controlling of the solidification microstructures

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiBw

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy

Fabrication, Microstructure Characterization and Fracture Behavior of a Unique Micro-Laminated TiB-TiAl Composites

Research Progress on TiAl Alloy Prepared by Powder Metallurgy

Progress in Research on in Situ Synthesis Particulate Reinforced Titanium Matrix Composites

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

Research Progress on Additive Manufacturing TiAl Alloy

Synthesis and Mechanical Properties of Innovative (Tib/ti)-Ti3al Micro-Laminated Composites

In Situ Formation of Al3Ti and Its Effects on the Microstructure, Hardness and Tribological Properties of Al Matrix Composites with Various Ti Contents

In Situ TiC and TiB2 Cooperatively Reinforced Al-Cu Composites