Abstract:The interface control is critical in the development of high-performance molybdenum (Mo) alloys for high-temperature applications like space reactors. In this work, nanostructured Mo-ZrC alloy with excellent mechanical properties at both room temperature and high temperatures was fabricated by nanoscale ZrC dispersion and interface control. The average grain size of Mo-ZrC alloy is only 0.67 mu m owing to the homogeneous dispersion of nanoscale ZrC particles. At room temperature, the ultimate tensile strength (UTS) and total elongation (TE) of the Mo-ZrC alloy are 928 MPa and 34.4%, respectively. At 1000 degrees C, the UTS is still as high as 562 MPa, which is significantly higher than those reported in oxide dispersion-strengthened Mo alloys, while the TE remains a high value of 23.5%. Additionally, the recrystallization start temperature of Mo-ZrC alloy is about 1400 degrees C, indicating remarkable thermal stability. First-principles calculations revealed that the interstitial oxygen reduces grain boundary cohesion, while C and ZrC could increase the fracture strength of the boundaries owing to the strong Mo-C bonds. The excellent mechanical properties and thermal stability of the Mo-ZrC alloy can be attributed to a synergistic effect of nanoscale ZrC particles dispersion strengthening, fine-grain strengthening, and grain boundary purification. The strategy could be applied to design other refractory alloys with both high strength and ductility for high-temperature applications. (c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

High Temperature Deformation of Zrc Particulate-Reinforced Nb-Mo-W Composites

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Microstructure and High Temperature Deformation Behavior of the Mo-ZrO 2 Alloys

The Mechanical and Thermophysical Properties of ZrC/W Composites at Elevated Temperature

Zr addition-induced transitions of deformation mechanism at high temperatures of Nb-Si-Ti based multi-alloys: Super-dislocations in γ-Nb 5 Si 3

Elevated temperature fracture behavior of ZrC particle-reinforced tungsten matrix composite

Excellent High-Temperature Strength and Ductility of the ZrC Nanoparticles Dispersed Molybdenum

Strength properties and fracture behavior of ZrC particle-reinforced tungsten composite

Dislocation Behavior in ZrC Particles During Elevated Temperature Compressive Deformation of a 30 Vol.% ZrC_p/W Composite

Elevated Temperature Compressive Strength and Deformation Behavior of A Zrcp Reinforced Tungsten-Matrix Composite

Microstructure Evolution and Mechanical Properties of ZrC-added Nb–16Si–20Ti Alloys

High temperature tensile properties of 30 vol. pct ZrCp/W composite

Compressive Deformation Behavior of a 30 Vol.%zrcp/w Composite at Temperatures of 1300–1600 °C

High temperature deformation of ZrB2–SiC–AlN ceramic composite

Enhanced Mechanical Properties and Thermal Stability of Hot-Rolled Mo-0.5%ZrC Alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of ZrC Particles Reinforced Tungsten-Matrix Composites

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Thermal deformation characteristics of AlMo0.8NbTiW0.2Zr refractory multi-principal element alloy

Preparation And Thermal Stability Of Zr-Al-Ni-Cu-Nb Bulk Amorphous Alloy Matrix Composites

Microstructure and Mechanical Properties of ZrB2–Nb Composite

Influence of High Temperature Deformation on the Fracture Behavior of a Bulk Zr-based Metallic Glass