Investigations on the Weldability of High-Strength Steels Sheet to Cylindrical Tube Single-Sided Spot Welding
HongGang Yang,XinMin Lai,YanSong Zhang,GuanLong Chen
DOI: https://doi.org/10.1007/s00170-009-2418-8
IF: 3.563
2009-01-01
The International Journal of Advanced Manufacturing Technology
Abstract:With the promotion of weight reduction, hydroformed tubes have been widely used in vehicle construction. Because of different section shapes in hydroformed tubes, sheet to cylindrical tube joining process by single-sided spot welding (SSSW) is proposed in the present paper. However, because of line contact status and low structural stiffness, welding deformation often occurs. As a result, doughnut weld nugget is formed, and welding quality is affected. In this study, the microstructure and microhardness of the doughnut weld nugget are investigated, and the weldability of high-strength steels sheet to cylindrical tube SSSW with different electrode force, tube thickness, and radius is explored, respectively, through the analysis of dynamic electrical resistance. Because of special structural characteristics, the weld lobe for sheet to cylindrical tube SSSW is very narrow. Owing to high dynamic resistance, the weld lobe is moved to the left with small electrode force or high tube thickness, and the weld lobe is expanded with thick cylindrical tube. With the decrease of tube radius, crack or expulsion easily occurs, and the weld lobe gets narrow. Welding time is also found to be an important parameter, which influences the weldability because proper welding time can enlarge the weld lobe.