Abstract:Scholars have studied the impact of rubber particles (RPs) on the performance of the concrete and the research topics have covered all the mechanical properties and durability of normal concrete (NC). Recently, scholars have turned their research interest to the structural properties of concrete. However, there are few experimental studies on the bonding properties of RC to NC. The RPs have both positive and negative impacts on the bond performance. On one hand, RPs can reduce the shrinkage of concrete, resulting in reduced shear stress and tensile stress near the bonding boundary. On the other hand, RPs cause a reduction in the overall strength of concrete, resulting in the poor mechanical performance of the interface transition layer between the two concrete. The test results of this study show that the bonding splitting tensile strength between freshly mixed RC to aged NC first increases and then decreases with the rise of the RPs content in the RC, and the bonding splitting tensile strength reaches the peak when the RPs content is 10%. The bonding splitting tensile strength between the NC and the RC mixed with 3–5 mm RP is higher than that between the NC and the RC mixed with 1–3 mm RPs. When mixed with modified RPs, the bonding splitting tensile strength between the RC and the NC is improved. Applying an interfacial agent (a cement slurry or an epoxy) on the old concrete bonding surface can significantly improve the bonding splitting tensile strength. The results of non-repeated two-way ANOVA show that the content of the RPs and the type of the interfacial agent have significant effects on the bond splitting tensile strength, while the size and modification of the RPs have no significant effects on the bond splitting tensile strength.

Experimental Research on Splitting Tensile Behavior of Adhesion of Polymer Mortar and Concrete

The Mechanical Properties of Polymer-cement Mortar

Stress analysis and experimental study on flexible ceramic tile cementing agent

Rheological properties of mortar and concrete with low binder content

Large scale experimental study on bond behavior between polymer modified cement mortar layer and concrete

Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions

Property and application for polyvinyl acetate cement mortar

Research on Interfacial Bonding Properties and Engineering Applications of Polymer Modified Mortar

Experimental on the Behavior of Beams Strengthened by Polymer-modified Fiber Cement Mortar Under Hydrothermal Conditions

Dynamic compressive and splitting tensile tests on mortar using split Hopkinson pressure bar technique

MODIFICATION ANALYSIS AND EXPERIMENTAL STUDY OF MOSONRY MORTAR

Experimental Study on Dynamic Tensile Strength of Cement Mortar Using Split Hopkinson Pressure Bar Technique

Experimental Study on Bond-anchorage of High-strength Stainless Steel Wire in Polymer Mortar

Fracture Mechanisms of Polymer Cement Mortar: Concrete Interfaces

EXPERIMENTS ON SATURATED CONCRETE UNDER DIFFERENT SPLITTING TENSILE RATE AND MECHANISM ON STRENGTH CHANGE

Influence of Polymer on Shrinkage and Anti-Cracking Performance of Mortar

Rheological, mechanical, and abrasion characteristics of polymer-modified cement mortar and concrete

Quasi-static and Dynamic Experimental Studies on the Tensile Strength and Failure Pattern of Concrete and Mortar Discs

Experimental Study on Features of Hydraulic Polymers Modified Cement Mortar

Experimental Investigation On The Influence Of Multiscale Pores On The Static And Dynamic Splitting Tensile Strength Of Cementitious Materials Based On The Virtual Pore Method

Experimental Study on the Property and Mechanism of the Bonding Between Rubberized Concrete and Normal Concrete