Abstract:Advanced three-dimensional (3D) woven composites for aerospace and automotive applications are commonly subjected to complex dynamic environments involving vibrations and impacts, resulting in examining their impact properties is extremely important. This paper first experimentally discussed the influences of strain rates, weft yarn densities and loading directions on the impact performances and failure mechanisms of 3D orthogonal woven composites (3DOWCs). Secondly, full-scale finite element models were developed to predict the stress distribution and interfacial damage evolution process. The predictions were well in agreement with the experimental results. This research revealed that the impact characteristics exhibited strain rate sensitivity. With increasing weft yarn densities, the high strain rate impact behaviors also improved. Particularly, the warp impact strength of 3DOWCs with a weft yarn density of 2 yarn/cm (W5-2) at 812 s -1 was 17.4% and 24.0% higher than that of 3DOWCs with a weft yarn density of 1.5 yarn/cm (W5-1) at 822 s -1 . Meanwhile, warp impact strength consistently exceeded to that of the weft impact strength. Additionally, strain rates, weft yarn densities, and loading directions dramatically affected the stress distribution and interfacial damage evolution process of 3DOWCs. Significant warp yarns fracture and matrix cracking were the principal failure patterns in the warp impact, whereas the damage in the weft impact was dominated by localized fracture of weft yarns and interfacial debonding.

Evaluation of Thermo-Elastic Properties of Three-Dimensional Orthogonal Woven Composites

Evaluation of Elastic Properties of 3D 4-Directional Braided Composites

Thermo-Viscoelastic Response of 3D Braided Composites Based on a Novel FsMsFE Method

Experiment Study of Mechanical Properties of 3D Orthogonal Woven Composite

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Numerical investigation on mechanical behavior of 3D orthogonal woven composites in hygrothermal environments

Thermo-Mechanical Behavior Analysis of 3d Braided Composites by Multiscale Finite Element Method

A non-orthogonal constitutive model for characterizing woven composites

Numerical Prediction of Effective Thermal Conductivities of 3D Four-Directional Braided Composites

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Theoretical Analysis of Thermophysical Properties of 3D Carbon/Epoxy Braided Composites with Varying Temperature

Extended multiscale FE approach for steady-state heat conduction analysis of 3D braided composites

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Numerical Modeling of 3D Woven Hybrid Composites for Stiffness and Strength Prediction

Finite Element Modeling of 3D Orthogonal Woven C/C Composite Based on Micro-Computed Tomography Experiment

Orthotropic Thermal Conductivity of Plain-Weave Fabric Composites Using a Homogenization Technique

A Dual Homogenization and Finite Element Approach for Material Characterization of Textile Composites

Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

A parameterized and automated modelling method for 3D orthogonal woven composite RVEs considering yarn geometry variations