Abstract:The shell-and-plate heat exchanger is a completely welded heat exchanger that combines the best features of a shell-and-tube heat exchanger with a plate heat exchanger. The flow between the circular corrugated plates behaves as a first expanding then converging flow, leading to the intricate nature of flow structures, flow resistance, and phase-change heat transfer. The present paper numerically investigates the flow behaviors and heat transfer characteristics in the channel between the circular corrugated plates of 0.2 m in diameter, 0.0022 in corrugation depth, and 75 degrees in corrugation angle. In the simulation, the gas velocity ranges from 0.25-6.00 m/s while the liquid velocity from 0.01-0.20 m/s. The wall is set as adiabatic and constant temperature condition of 350 K, respectively. For the single-phase flow, a longitudinal spiral flow along the main flow direction is formed, and the local velocity at the edge of the circular plate is generally higher and more turbulent than that in the central area. Additionally, the increase of Reynolds number leads to a more significant pressure drop but an apparent heat transfer enhancement. Based on the analysis of the friction factor and Nusselt number with Reynolds number, the empirical correlations for predicting the flow resistance and heat transfer characteristics in the channel are proposed. For the two-phase flow, we employed the VOF model to investigate the distribution of the phases in the downward flows. Compared with the experimental data, the numerical results are demonstrated to provide an accurate analysis of the phases distribution, particularly in the cross section of the channel. Accordingly, the flow patterns in the downward two-phase flows are identified as bubbly flow, slug flow, film flow, and churn flow. Based on the variation of the averaged void fraction, the film flow can be identified as alpha > 0.8 while bubbly flow as alpha < 0.5. Additionally, the void fraction in the cross section of the flow channel along the flow direction is analyzed in detail. Since the effect of the expansion and contraction of structures will go away with an increase in the gas mass flow rate, it can be anticipated that the effect of uniform distribution is more prominent for slug flow and is negligible for film flow.

Numerical Simulation on Heat Transfer and Fluid Flow Characteristics of Arrays with Nonuniform Plate Length Positioned Obliquely to the Flow Direction

Heat Transfer and Fluid Flow Characteristics of Plate-Array Aligned at Angles to the Flow Direction

An Experimental-Study on Heat Mass-Transfer and Pressure-Drop Characteristics for Arrays of Nonuniform Plate Length Positioned Obliquely to the Flow Direction

Experimental study on heat transfer and pressure drop characteristics in the developing region for arrays of obliquely positioned plates of nonuniform length

Numerical Simulation of Heat Transfer at an Array of Co-Planar Slat-Like Surfaces Oriented Normal to A Forced Convection Flow

Performance Evaluation Of Forced Convective Heat Transfer Across Plate Arrays

Numerical Investigation of Impingement Heat Transfer on A Flat and Square Pin-Fin Roughened Plates

Nummerical Simulation Of Heat Transfer Of Air Across Finned Tube-Banks

Some Enhancement Studies For Laminar And Tuebulent Heat Transfer Of Air In Tubes And Across Plates

Direct Numerical Simulations on the Flow Past a Thin Square Plate

NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS

Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination

SIMULTANEOUS NATURAL-CONVECTION HEAT TRANSFER ABOVE AND BELOW AN ISOTHERMAL HORIZONTAL THIN PLATE

Numerical Simulation Of Heat Transfer Performance Of Slotted Fin Surface

Numerical Prediction for Laminar Forced Convection Heat Transfer in Parallel-Plate Channels with Streamwise-Periodic Rod Disturbances

Numerical study on laminar flow forced‐convection heat transfer for air in a channel with offset plates heated by radiation heat flux

Numerical investigation of heat transfer and fluid flow characteristics inside a wavy channel

Three-dimensional numerical study of heat transfer characteristics of plain plate fin-and-tube heat exchangers from view point of field synergy principle

Numerical predictions of jet impingement heat transfer on square pin-fin roughened plates

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical Simulation of the Flow and Heat Transfer Characteristics of Sweeping and Direct Jets on a Flat Plate with Film Holes