Abstract:The ultimate objective of hybrid miniemulsion polymerization is to produce a water-based crosslinkable coating through in situ grafting of a free radical growing acrylic polymer with an unsaturated resin. Certain authors have reported low grafting while others have reported higher. This article explores the factors that influence the grafting tendencies of these systems. Methacrylates such as methyl methacrylate (MMA) have a sterically hindered radical center that lowers its reactivity toward unsaturated resin. This steric hindrance from the methyl group forces grafting of this type of monomer to occur by abstraction of a hydrogen allylic to a resinous double bond. This chain transfer produces a relatively inactive radical on the resin that reduces the grafting efficiency. The transfer process also inherently produces some degree of terminated PMMA polymer within the particle. Grafting occurs in this type of system through termination of living PMMA chains with that radical produced on the resin. For relatively water-soluble monomers such as MMA, grafting efficiency is further lessened by homogeneous nucleation resulting from the monomer hydrophilicity. These newly created particles cannot contain alkyd due to its hydrophobicity and thus inability to transport across the aqueous phase, and hence cannot produce grafted polymer. Nonetheless, degree of grafting of nearly 50% was observed in these systems. For hybrid systems involving an acrylate monomer such as butyl acrylate (BA), virtually complete grafting with alkyd was observed. This is due to the uninhibited BA radical center allowing the molecule to add directly through a resin double bond. This process offers the possibility for complete grafting. Homogeneous nucleation is not involved in this system due to the insolubility of BA in the aqueous phase. Resin double bond content and degree of conjugation also play an integral role in the grafting process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1825–1836, 2003

Directly Fabricating Monolayer Nanoparticles on a Polymer Surface by UV‐Induced MMA/DVB Microemulsion Graft Polymerization

Grafting Mechanisms in Hybrid Miniemulsion Polymerization

MMA/DVB emulsion surface graft polymerization initiated by UV light.

Surface Photografting Polymerization of Methyl Methacrylate in N,N-Dimethylformamide on Low Density Polyethylene Film

Controlled Grafting of Well-Defined Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atom Transfer Radical Polymerization

Fabrication and Characterization of Ag/polymer Nanocomposite Films Through Layer-by-layer Self-Assembly Technique

Controlled Grafting of Well-Defined Epoxide Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atrp at Ambient Temperature

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in emulsion

Controlled Grafting of Comb Copolymer Brushes on Poly(tetrafluoroethylene) Films by Surface-Initiated Living Radical Polymerizations.

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

ANCHORING OF AZO INITIATOR AND GRAFTING OF POLY(METHYL METHACRYLATE) ONTO NANAOMETER SILICA

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

Preparation of Poly(Methylmethacrylate)/Layered Double Hydroxides Nanocomposites Via in Situ Solution Polymerization

Surface Photografting Polymerization Of Trimethylolpropane Triacrylate Onto Ldpe Substrate In Tetrahydrofuran/Water Mixtures

A Facile Method of Forming Nanoscale Patterns on Poly(ethylene Glycol)-Based Surfaces by Self-Assembly of Randomly Grafted Block Copolymer Brushes.

Mini-Emulsification and Mini-Emulsion Polymerization of Methyl Methacrylate/Nanosilica Dipsersion

Surface Photografting Polymerization of Binary Monomers Maleic Anhydride and n -Butyl Vinyl Ether on Polypropylene Film I. Effects of Principal Factors

Preparation and Surface Morphology of Pnipaam-Grafted Layers on Polypropylene Films

Synthesis of Nanosize Poly(methyl Methacrylate) Microlatexes with High Polymer Content by a Modified Microemulsion Polymerization

Controlled Grafting of Poly(methyl Methacrylate) Brushes on Poly(vinylidene Fluoride) Powders by Surface‐initiated Atom Transfer Radical Polymerization

Facile Surface Superhydrophilic Modification: NVP/MBA Inverse Microemulsion Surface‐Grafting Polymerization Initiated by UV Light