Abstract:The surface properties of poly(dimethyl siloxane) (PDMS) layers screen printed onto silicon wafers were studied after oxygen and ammonia plasma treatments and subsequent grafting of poly(ethylene -alt-maleic anhydride) (PEMA) using X-ray photoelectron spectroscopy (XPS), roughness analysis, and contact angle and electrokinetic measurements. In the case of oxygen-plasma-treated PDMS, a hydrophilic, brittle, silica-like surface layer containing reactive silanol groups was obtained. These surfaces indicate a strong tendency for "hydrophobic recovery" due to the surface segregation of low-molecular-weight PDMS species. The ammonia plasma treatment of PDMS resulted in the generation of amino-functional surface groups and the formation of a weak boundary layer that could be washed off by polar liquids. To avoid the loss of the plasma modification effect and to achieve stabilization of the mechanically instable, functionalized PDMS top layer, PEMA was subsequently grafted directly or after using gamma-APS as a coupling agent on the plasma-activated PDMS surfaces. In this way, long-time stable surface functionalization of PDMS was obtained. The reactivity of the PEMA-coated PDMS surface caused by the availability of anhydride groups could be controlled by the number of amino functional surface groups of the PDMS surface necessary for the covalent binding of PEMA. The higher the number of amino functional surface groups available for the grafting-to procedure, the lower the hydrophilicity and hence the lower the reactivity of the PEMA-coated PDMS surface. Additionally, pull-off tests were applied to estimate the effect of surface modification on the adhesion between the silicone rubber and an epoxy resin.

Plasma Polymerization and Deposition of Glycidyl Methacrylate on Si(100) Surface for Adhesion Improvement with Polyimide

Thermal Imidization of Poly(amic Acid) Precursors on Glycidyl Methacrylate (GMA) Graft-Polymerized Si(100) Surface

Thermal imidization of fluorinated poly(amic acid) precursors on a glycidyl methacrylate graft-polymerized Si(100) surface

Controlled Grafting of Well-Defined Epoxide Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atrp at Ambient Temperature

Functionalization of Hydrogen-Terminated Silicon Via Surface-Initiated Atom-Transfer Radical Polymerization and Derivatization of the Polymer Brushes

Controlled Grafting of Well-Defined Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atom Transfer Radical Polymerization

Modification of Si(100) Surface by Plasma-Enhanced Graft Polymerization of Allylpentafluorobenzene

Fabrication of Poly(methyl Methacrylate)‐block‐poly(n‐isopropylacrylamide) Amphiphilic Diblock Copolymer on Silicon Substrates Via Surface‐initiated Reverse Iodine Transfer Polymerization

Surface Graft Polymerization of Glycidyl Methacrylate Onto Polyethylene and the Adhesion with Epoxy Resin

Surface grafting of polyimide onto silicon surface: Preparation and characterization

Thermal imidization of poly(amic acid) precursors on surface-modified poly(tetrafluoroethylene) films via graft copolymerization with glycidyl methacrylate

Covalent Grafting of Tethered Homopolymer Film on P-Si(100).

Chemical Modification of Silicon (100) Surface Via UV-Induced Graft Polymerization

Surface functionalization of silicone rubber for permanent adhesion improvement

Surface Modification of Polyimide Films Via Plasma Polymerization and Deposition of Allylpentafluorobenzene

Grafting and Properties of A Porous Poly(Methyl Methacrylate) Film on A Silicon Surface by A One-Step Dipping Method

Surface chemical and mechanical properties of plasma-polymerized N-isopropylacrylamide

Adhesion of PE Modified by Capacitively Coupled Radio Frequency Plasma-Induced Graft Polymerization of Glycidyl Methacrylate

Hydrophilic modification of a polyimide film surface

Surface grafting onto SiC nanoparticles with glycidyl methacrylate in emulsion

Chemical Modification Of The Surface Of Poly(Dimethylsiloxane) By Atom-Transfer Radical Polymerization Of Acrylamide