Abstract:An accurate and acceptable correlation for the prediction of two-phase pressure drop is considered a crucial step in heat exchanger design. Although many existing models and correlations were developed and proposed in the past, their ability to predict within acceptable error bands when applied in general to flow boiling flows is limited, even within their originally recorded ranges. The discrepancies are worse when predicting two-phase pressure drop in small to micro-scale passages. Therefore, the aim of the work described in this paper is to assess the most well-known models and correlations using a large experimental data-bank. The data-bank includes four refrigerants, namely R134a, R245fa, HFE-7100 and HFE-7200, small to micro heat exchangers made of different metals and different channel configurations. In addition, the data cover a large range of operating conditions, which can allow generally applicability of new correlations developed. This range covers channel hydraulic diameter of 0.46−4.26 mm, heated length of 20−500 mm, system pressure of 1 − 14 bar, mass flux of 50−700 kg/m 2 s, wall heat flux ranging from 2 to 234 kW/m 2 and exit vapour quality up to one. Twenty six existing models and correlations that were developed and proposed for vertical/horizontal flow, single/multi-channels and circular/non-circular channels were evaluated. Moreover, the effect of using different equations for calculating the two-phase mixture viscosity, void fraction, Fanning friction factor and Lockhart–Martinelli parameter was assessed and discussed. The mean absolute error of the existing correlations when compared with our data-bank was more than 30 %. Therefore, a new correlation for calculating the two-phase multiplier, which was strongly dependent on the Boiling number and the Lockhart–Martinelli parameter, was developed and then the frictional component and total two-phase pressure drop relationships were completed.

A general correlation for adiabatic two-phase pressure drop in micro/mini-channels

Generalized Adiabatic Pressure Drop Correlations in Evaporative Micro/mini-Channels

Generalized Adiabatic Two-Phase Pressure Drop Correlation in Evaporative Micro/Mini-Channels

Analysis of Frictional Pressure Drop Correlations of Refrigerant Two-Phase Flow in Mini-Channel

A General Criterion for Evaporative Heat Transfer in Micro/Mini-Channels

Characteristics of Frictional Pressure Drop of Two-Phase Nitrogen Flow in Horizontal Smooth Mini Channels in Diabatic/adiabatic Conditions

Measurements Of Single-Phase And Two-Phase Flow Pressure Drops In Capillary Triangular Channels

Pressure Drop Characteristics of Gas–liquid Two-Phase Flow in Vertical Miniature Triangular Channels

Development of a correlation for pressure drop of two-phase flow inside horizontal small diameter smooth and microfin tubes

New Correlations for Two Phase Flow Pressure Drop in Homogeneous Flows Model

A New General Correlation for Frictional Pressure Drop During Condensation Inside Horizontal Micro-Fin Tubes

An Experimental Investigation of Pressure Drop in Two-Phase Flow during the Condensation of R410A within Parallel Microchannels

A GENERAL FRICTIONAL PRESSURE DROP CORRELATION FOR CONDENSATION IN MICROFIN TUBES

Flow boiling pressure drop correlation in small to micro passages

Evaluation of Two-Phase Frictional Pressure Drop Correlations Against Experimental Data

Correlations of Two-phase Friction of Refrigerant in Horizontal Smooth Tube with 2.5 mm inside Diameter

Flow Pattern Study and Pressure Drop Prediction of Two-Phase Boiling Process in Different Surface Wettability Microchannel

Correlations for predicting single phase and two-phase flow pressure drop in pebble bed flow channels

An Experimental Investigation on Pressure Drop of Steam Condensing in Silicon Microchannels

Frictional Pressure Drop During Flow Boiling in Micro-Fin Tubes: A New General Correlation

Machine learning-based models for frictional pressure drop prediction of condensing and adiabatic flow in micro, mini and macro channels utilizing universal data