Abstract:Supercapacitors have been regarded as one of the next-generation energy storage devices because of the high power density, excellent cycling performance, long lifespan and easy maintenance. However, its relatively low specific energy hinders its application in the future. Recently, Na-ion based aqueous hybrid supercapacitors have attracted worldwide attention due to its high energy density, environment friendly and low cost. In our work, the Na-ion aqueous hybrid supercapacitor is constructed with NaTi2(PO4)(3)/C and commercial activated carbon as electrode materials. NaTi2(PO4)(3)/C nanoparticles with the size of about 40 nm were synthesized by high-temperature solid state reaction method using the NaTi2(PO4)(3)/C precursor that was prepared through the solution method with Ti(C4H9O)(4), NH4H2PO4, Na2CO3 as the raw materials, and citric acid as the carbon source. The electrochemical tests were performed using 1 mol.L-1 Na2SO4 solution as the electrolyte. The carbon-coated NaTi2(PO4)(3) electrode delivers the discharge capacity of 122 mAh.g(-1) and shows an excellent cycling stability with the retention of 60% of the initial capacity after 1000 cycles at a 10C rate. The supercapacitor was consisted of NaTi2(PO4)(3)/C anode, AC cathode and 1 mol.L-1 Na2SO4 electrolyte. And the weight ratio of active materials in cathode and anode was 2.2. Cyclic voltammetry, galvanostatic test were employed to study the electrochemical properties of the supercapacitor. The as-fabricated device was then cycled between 0.15 similar to 1.4 V with different current density. Our results show the power density of 121.15 W.kg(-1) with specific energy of 18.71 Wh.kg(-1) at the current density of 0.5 A.g(-1). Moreover, the specific energy and power density goes to 14.13 Wh.kg(-1) and 2.42 kW.kg(-1) at a higher current density of 10 A.g(-1). More importantly, the device showed an excellent cycling stability with the retention of 76% after 1000 cycles at a current density of 1 A.g(-1). This research shows the designed hybrid supercapacitor has the potential to be used as auxiliary high-power energy storage device for the practical applications.

EFFECTS OF PORE STRUCTURE AND WET CHARACTERISTIC ON THE ELECTROCHEMICAL PERFORMANCE OF THE HYBRID SUPERCAPACITORS

Electrochemical Capacitance Performance of Hybrid Supercapacitors Based on Ni(OH)[sub 2]∕carbon Nanotube Composites and Activated Carbon

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

High-Performance Supercapacitors Based on Graphene/Activated Carbon Hybrid Electrodes Prepared Via Dry Processing

NiCo layered double hydroxide/biomass-derived porous carbon aerogel composite for high-performance hybrid supercapacitors

Synergistic effect of porous structure and heteroatoms in carbon materials to boost high‐performance supercapacitor

Influence of pore structure on the electrochemical performance of activated carbon as electrode material for aqueous supercapacitors

High Performance Hybrid Supercapacitor Based on Graphene-Supported Ni(OH)2-Nanowires and Ordered Mesoporous Carbon CMK-5

Porous Mesocarbon Microbeads with Graphitic Shells: Constructing a High-Rate, High-Capacity Cathode for Hybrid Supercapacitor

Rational Design of Porous NiCo2S4 Nanotubes for Hybrid Supercapacitor

Porous Carbon Material:Post-treatment through Chemical Vapor Method and Supercapacitor Performance

Study on the Aqueous Hybrid Supercapacitor Based on Carbon-coated NaTi2(PO4)3 and Activated Carbon Electrode Materials

Electrochemical Supercapacitors Based on Carbon Aerogels/Ni(Oh)(2) Composites and Activated Carbon

Porous carbon for high-energy density symmetrical supercapacitor and lithium-ion hybrid electrochemical capacitors

Preparation and electrochemical performance for supercapacitors of chitosan.based porous carbon materials

Effect of Structural and Compositional Alterations on the Specific Capacitance of Hazelnut Shell Activated Carbon

Combined effect of nitrogen-doped functional groups and porosity of porous carbons on electrochemical performance of supercapacitors

Enabling high surface and space utilization of activated carbon for supercapacitors by homogeneous activation

Porous high specific surface area-activated carbon with co-doping N, S and P for high-performance supercapacitors

Study on different capacity ratio of the positive electrode and the negative electrode of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2/AC hybrid supercapacitor