Abstract:Supercapacitors have been regarded as one of the next-generation energy storage devices because of the high power density, excellent cycling performance, long lifespan and easy maintenance. However, its relatively low specific energy hinders its application in the future. Recently, Na-ion based aqueous hybrid supercapacitors have attracted worldwide attention due to its high energy density, environment friendly and low cost. In our work, the Na-ion aqueous hybrid supercapacitor is constructed with NaTi2(PO4)(3)/C and commercial activated carbon as electrode materials. NaTi2(PO4)(3)/C nanoparticles with the size of about 40 nm were synthesized by high-temperature solid state reaction method using the NaTi2(PO4)(3)/C precursor that was prepared through the solution method with Ti(C4H9O)(4), NH4H2PO4, Na2CO3 as the raw materials, and citric acid as the carbon source. The electrochemical tests were performed using 1 mol.L-1 Na2SO4 solution as the electrolyte. The carbon-coated NaTi2(PO4)(3) electrode delivers the discharge capacity of 122 mAh.g(-1) and shows an excellent cycling stability with the retention of 60% of the initial capacity after 1000 cycles at a 10C rate. The supercapacitor was consisted of NaTi2(PO4)(3)/C anode, AC cathode and 1 mol.L-1 Na2SO4 electrolyte. And the weight ratio of active materials in cathode and anode was 2.2. Cyclic voltammetry, galvanostatic test were employed to study the electrochemical properties of the supercapacitor. The as-fabricated device was then cycled between 0.15 similar to 1.4 V with different current density. Our results show the power density of 121.15 W.kg(-1) with specific energy of 18.71 Wh.kg(-1) at the current density of 0.5 A.g(-1). Moreover, the specific energy and power density goes to 14.13 Wh.kg(-1) and 2.42 kW.kg(-1) at a higher current density of 10 A.g(-1). More importantly, the device showed an excellent cycling stability with the retention of 76% after 1000 cycles at a current density of 1 A.g(-1). This research shows the designed hybrid supercapacitor has the potential to be used as auxiliary high-power energy storage device for the practical applications.

Electrochemical Supercapacitors Based on Carbon Aerogels/Ni(Oh)(2) Composites and Activated Carbon

Balanced Energy Density and Power Density: Asymmetric Supercapacitor Based on Activated Fullerene Carbon Soot Anode and Graphene-Co3o4 Composite Cathode

An Asymmetric Supercapacitor Based on a NiO/Co3O4@NiCo Cathode and an Activated Carbon Anode

High-Performance Supercapacitors Based on Graphene/Activated Carbon Hybrid Electrodes Prepared Via Dry Processing

Manganese oxide/nitrogen-doped carbon aerogels from cellulose nanofibrils for high-performance supercapacitor electrodes

Nickel Sulfide/activated Carbon Nanotubes Nanocomposites As Advanced Electrode of High-Performance Aqueous Asymmetric Supercapacitors

Ni(Oh)(2) Nanowires/Graphite Foam Composite As an Advanced Supercapacitor Electrode with Improved Cycle Performance

Robust Negative Electrode Materials Derived from Carbon Dots and Porous Hydrogels for High-Performance Hybrid Supercapacitors.

Synthesis of Nitrogen-Doped Porous Carbon Nanofibers As an Efficient Electrode Material for Supercapacitors.

Study on the Aqueous Hybrid Supercapacitor Based on Carbon-coated NaTi2(PO4)3 and Activated Carbon Electrode Materials

Electrochemical Performance Of Combined Ni(Oh)(2)/Carbon Nanotubes(Cnts) Composite-Activated Carbon Supercapacitor

Designing a carbon nanofiber-encapsulated iron carbide anode and nickel-cobalt sulfide-decorated carbon nanofiber cathode for high-performance supercapacitors

High-performance All-Solid State Asymmetric Supercapacitor Based on Co3O4 Nanowires and Carbon Aerogel

Electrochemical Capacitance Performance of Hybrid Supercapacitors Based on Ni(OH)[sub 2]∕carbon Nanotube Composites and Activated Carbon

Carbonaceous electrode materials for supercapacitor: Preparation and surface functionalization

Electrospun nickel cobalt phosphide/carbon nanofibers as high-performance electrodes for supercapacitors

Fabrication of High-Performance Asymmetric Supercapacitor Consists of Nickel Oxide and Activated Carbon (NiO//AC)

NiCo layered double hydroxide/biomass-derived porous carbon aerogel composite for high-performance hybrid supercapacitors

Synthesis of the Urchin‐Like NiS@NiCo2S4 Composites on Nickel Foam for High‐Performance Supercapacitors

Porous Graphene/CNT@Metal (Hydr)oxide Composite Films Achieving Fast Ion and Electron Kinetics for Asymmetric Supercapacitors with Ultra-High Volumetric Performance

PVP-Assisted Synthesis of Self-Supported Ni2P@Carbon for High-Performance Supercapacitor