Abstract:Geopolymers are a kind of polymeric material that can be formed using industrial applications based on inorganic polycondensation. They can be used in applications to replace traditional cement with environmental and technical benefits. In this paper, mixtures with different silica moduli (0.8, 0.9, 1.0) and molar ratios (12, 14, 16 M) were used to prepare geopolymer mortar, and the optimum polypropylene (PP) fiberreinforced mixture was determined. The PP fibers in the geopolymer form constituted 0, 0.5 and 1.0% of the total volume of the mixture. Geopolymer (cement-less) matrix interaction performance played an important role in identifying the characteristics of the fiber-based composites. The mechanical and microstructural properties of the mixtures were determined. The optimum mixture was obtained from the sample with a molar ratio of 16 M and 0.5% fiber. This mixture was then used to cast the fiber-reinforced gepolymer composites. These composites were produced using three different geosynthetics with the optimum mixture. The experimental behavior of the composites was investigated using PP geogrid composite (PPGC), carbon geogrid composite (CGC) and polyfelt geotextile composite (PGC) under flexural loading. We observed that the compressive strength of the composites increased as the curing temperature and NaOH concentration increased in geopolymer composites with a high molar ratio. The microstructural properties of the samples changed with temperature: the voids decreased and the calcium silicate hydrate (CSH) gels provided compact bonding during the geopolymerization process. Furthermore, the PPGC demonstrated high viscosity, good adherence and high flexural strength.

Study of the mechanical properties of mica-filled polypropylene-based GMT composite

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Study on thermal stability of PP/MMT nanocomposites

Rheological Behavior for Mica-Filled Polypropylene Composite Melts

Investigation of thermal, rheological and mechanical properties of interfacially modified PP/mica composites

Study on the Interfacial Compatibilization and Section Morphology of PP/PP-g-MAH/Superfin Mica Blend

Grafted Polyolefin-Coated Synthetic Mica-Filled Polypropylene-Co-Ethylene Composites: A Study on the Interfacial Morphology and Properties

Study on Tensile and Dielectric Properties of GB/PP Composite

Thermal and Dynamic Mechanical Properties of Polypropylene-Montmorillonite (PP/MMT) Composites

Structure and Mechanical Properties of iPP/sPP/Mica Blends

Studies on Preparation and Mechanical Properites of Micro-mica/PE-g-MAH/PP Composites

Effect of MA-g-PP addition on mechanical properties of polypropylene/hollow glass spheres/nanoclay composites

Modification of PP by mica and nucleating agent

Mechanical Properties and Morphology of Polypropylene/Polypropylene-g-Maleic Anhydride/Long Glass Fiber Composites

Mechanical Properties of HDPE/Mica Composites

Preparation and Mechanical Property of PP/PPMA/Org-MMT Composites

Mechanical, Thermal, and Flow Properties of HDPE-Mica Composites

Interface and Properties of Polypropylene Composites Filled with Coated Nature Mica Powder

Mechanical and Microstructural Properties of Polypropylene Fiber-Reinforced Geopolymer Composites

Study on Properties of PLA/MMT Composites Prepared by Vane Extruder

Preparation and Properties of Polypropylene/montmorillonite Layered Nanocomposites