Abstract:Tensile properties are important use performances of materials. In the present paper. the tensile properties, such as elastic modulus (E-c) and yield strength of glass bead-filled polypropylene (PP) composites were measured by using an Instron material tester at room temperature and varied tensile rates, to identify the effects of tensile rates and filler concentration on these tensile properties. The fillers were A-glass heads. and the surface was pretreated with silane coupling agent. The fillers and PP with different proportion were compounded in a twin-screw extruder in temperature range of 160-230degreesC to produce the composites. The results showed that the E-c increased nonlinearly with increasing the filler content at lower tensile rates, while it did not vary practically with the filler concentration at the highest tensile rate. When the Her content was a constant, E,. was approximately an exponential function of tensile strain rates, except for individual data points. The tensile yield stress (sigma(yc)) decreased nonlinearly with the addition of the filler volume fraction (phi(f)) at lower tensile rates, while it decreased almost linearly with the increase of phi(f) at highest tensile rate. Similarly, sigma(yc) increased with increasing tensile strain rates as a form of index function. Furthermore, for these composites the relationship among E-c, sigma(yc), tensile strain rates and phi(f) were discussed.

Mechanical Properties Comparison of Long Glass Fiber Reinforced PP Composite

Toughness of long glass fiber reinforced polypropylene composites

Study on the Mechanical Properties of the Long Glass Fiber Reinforced PA66

Study of Property of Long Glass Fiber Reinforced PET Engineering Plastics

Properties of Long Fiber Reinforced Polypropylene Composites for Back Door

Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene Composites and Their Influence Factors

Influence of Fiber Length and Compatibilizer on Mechanical Properties of Long Glass Fiber Reinforced Polyamide 6,6

Mechanical Properties of Long Fiber Reinforced Polypropene by Melt Coating

Mechanical Properties and Morphology of Polypropylene/Polypropylene-g-Maleic Anhydride/Long Glass Fiber Composites

Study on Tensile and Dielectric Properties of GB/PP Composite

Influences of matrix resin on mechanical properties of LGF-PP

Recent Research Progress of Short Glass Fiber Reinforced Polypropylene

Structure and Property of Glass Fibers Reinforced Lignin/PP Composites

Mechanical Property of Long Glass Fiber Reinforced Polypropylene Composite: From Material to Car Seat Frame and Bumper Beam

Mechanical Properties of PPBES/PEEK Composites Reinforced by Short Glass Fiber

Fibre Orientation and Mechanical Properties of Short Glass Fibre Reinforced Pp Composites

Study of Glass Fiber Reinforcing PPR Copolymer with High Performance

Mechanical and Dielectric Properties of GB/PP Composites

Mechanical Propterties of Glass Bead Filled Polypropylene Composites

Preparation of High Strength PET/PE Composites Reinforced with Continued Long Glass Fibers

Influences Of Tensile Rates And Filler Content On Mechanical Properties For Pp-Gb Composites